ABB SAFT103 Programmable controllers

ABB SAFT103 Programmable controllers

Product Overview

ABB SAFT103 is often categorised as a key component used in industrial automation systems, which may be a programmable controller (PLC) or a card component for a specific system. It is widely used in various industrial automation scenarios for efficient and precise control and data processing.

Product Features

High-performance processor: SAFT103 is equipped with an on-board notebook low-power Pentium III-M/Celeron processor with a front-side bus frequency of 133/166MHz, ensuring fast data processing and stable system performance.

Rich Memory Configuration: 256M memory is onboard and can be expanded to 768M by adding 144 pin PC133 SODIMM memory sticks to meet the needs of various complex applications.

Various input/output interfaces: Multiple IDE ports, serial ports, parallel ports, USB ports, PS/2 ports, and network interfaces are provided to facilitate connection and data exchange with other devices and systems.

Strong expandability: The control and data processing functions of SAFT103 can be further expanded by adding input and output modules and other expansion modules.

High reliability and stability: Advanced hardware design and software algorithms are adopted to enable stable operation for a long time under harsh environmental conditions.

Product Specification

Brand and model: ABB SAFT103

Application: automatic voltage regulation

Range: 100~310

Accuracy: 0.1~1.1

Specification size: 200*110*50mm (or 170mm×170mm, slightly different information)

Operating temperature: -15℃~60

Relative humidity: 5%~90% (non-condensing dew)

Application Scenario

ABB SAFT103 is mainly used for control and data processing in industrial automation systems, especially in applications requiring high precision and reliability. It can be integrated with other equipment and systems to achieve complex automation control tasks.

Precautions

Installation: When installing SAFT103, make sure the environment is dry and clean, and prevent water, oil, dust and other debris from entering the inside of the controller.

Use: During use, fluctuations in supply voltage and electromagnetic interference should be avoided to avoid damage to the controller. At the same time, the internal and external air circuit components of the controller should be checked and cleaned regularly.

PROGRAMMING: When writing and downloading programmes, attention should be paid to the correctness and completeness of the programme to avoid problems such as logic errors and loss of programmes.

Maintenance: Regular maintenance and servicing of the SAFT103, including checking the heat dissipation, replacing the filter cloth, measuring the system battery, etc., to ensure its long-term stable operation.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.