Alcatel-Lucent 90-0413-01 Universal Card

The Alcatel‑Lucent 90‑0413‑01 is a versatile universal interface card designed for use in various telecom and networking chassis systems. This module provides a flexible combination of port types—including analog, digital, and Ethernet interfaces—allowing it to adapt to different service requirements in voice, data, and management networks. It is a key component for operators needing a single card to handle multiple access types in space‑constrained environments.

Overview

The 90‑0413‑01 universal card is typically deployed in Alcatel‑Lucent’s OmniPCX PBX, access nodes, or edge routers. It features a modular design with onboard processors for protocol handling and signal conditioning. The card can be configured via software to support FXS, FXO, E&M, T1/E1, or Ethernet interfaces, depending on the installed mezzanine modules or firmware. Its hot‑swappable capability ensures minimal service disruption during maintenance or upgrades.

Key Features

• Software‑configurable port types (analog, digital, Ethernet)

• Up to 8 or 16 ports per card (depending on configuration)

• Supports T1/E1, ISDN PRI, and FXS/FXO signaling

• Integrated echo cancellation and tone detection

• Diagnostic LEDs for port status and alarms

• Hot‑swappable field‑replaceable unit

• Management via CLI, SNMP, or TL1

Technical Specifications

• Port Capacity: 8 ports (mixed analog/digital) or 16 ports (analog only)

• Interface Types: FXS, FXO, E&M, T1, E1, 10/100 Ethernet

• Signaling: Loop‑start, ground‑start, E&M (wink/start), ISDN PRI, CAS

• Voice Codecs: G.711, G.729, G.723, G.726

• Echo Cancellation: G.168 compliant, up to 128 ms tail

• Power Consumption: 25 W typical

• Operating Temperature: 0°C to 45°C

• Dimensions: Standard chassis slot (approx. 220 mm × 180 mm)

Applications

This universal card is deployed in enterprise PBX systems, central office access equipment, and remote terminal concentrators. It allows service providers to offer analog voice, digital trunking, and IP connectivity from a single card, simplifying inventory and reducing sparing costs.

Integration and Management

The card is managed through the host system's management interface, allowing administrators to assign port types, set parameters, and monitor call statistics. It supports remote provisioning and firmware upgrades, as well as alarm reporting for line faults or hardware errors.

Installation and Maintenance

Install the card into the appropriate slot, secure it, and connect the interface cables. The system automatically detects the card and applies the pre‑configured settings. Maintenance includes periodic software updates and cleaning of connectors. The hot‑swap feature allows card replacement without chassis power‑down.

Conclusion

The Alcatel‑Lucent 90‑0413‑01 universal card offers a flexible, cost‑effective solution for mixed‑media connectivity in telecom and enterprise networks, reducing complexity and improving operational efficiency.