DS3800HSAA1R1J | General Electric Digital I/O Board Mark IV

DS3800HSAA1R1J | General Electric Digital I/O Board Mark IV

Product Description P/N: DS3800HSAA1R1J Description / Specifications Description The DS3800HSAA1R1J is a Digital I/O Board, Mark IV model. It is used for digital input and output functions in control systems, providing interface capabilities for signal processing and communication within the system's hardware configuration. Technical Specifications Condition New / Never Used Surplus Part # DS3800HSAA1R1J Category PLCs/Machine Control Subcategory PC Board PLC/Add-On Board Weight 1.00 lbs Features ANALOG/DIGITAL CONVERTER, 34-PIN CONNECTOR Information About DS3800HSAA1R1J The GE Dom Plus Servo Amp Board DS3800HSAA1R1J is equipped with a modular connector at one end and retention levers at the opposite end. 

The board includes a heat sink for thermal management. Integrated within the board is an analog/digital converter. Additionally, the board features a 34-pin connector and a socket designated for the installation of electrically erasable programmable read-only memory (EEPROM) modules. The board also contains three trimmer resistors. The DS3800HSAA1R1J model is designed with a single EEPROM module socket. In the event of board replacement, the replacement board will arrive with the EEPROM module socket unpopulated. This design allows technicians to transfer the EEPROM module from the defective board to the new one, ensuring continuity in operation. It is crucial that the firmware and instruction code on the new board match those of the previous board to maintain consistent performance. To remove the EEPROM module from the defective board, use a screwdriver to carefully pry the module from its socket. If the module is not immediately reinstalled, it should be stored in a static-protective pouch or envelope to prevent damage. 

For reinstallation, align the EEPROM module with the socket on the new board and press it firmly into place. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

The Series 90* -30 CPU374 PLUS provides a built-in enhanced Ethernet interface that  provides TCP/IP communications with: 

▪ Series 90, PACSystems, and VersaMax PLCs 

▪ Host computers running the Host Communications Toolkit or CIMPLICITY software 

▪ Computers running the TCP/IP version of the programming software CPU Features  

▪ High speed Boolean and non-Boolean processing provided by a 586-class 133MHz  processor 

▪ Two Ethernet ports: 10/100 Mbytes (one IP address) with a built-in, auto-sensing  Ethernet switch 

▪ Support for EZ Store Device allows you to download a program without a PC 

▪ 240KB of user memory Key Ethernet Features 

▪ Full PLC programming and configuration services 

▪ Periodic data exchange using Ethernet Global Data (EGD) and EGD commands to  read and write PLC and EGD exchange memory over the network 

▪ TCP/IP communication services using SRTP 

▪ Support for SRTP Client (Channels) 

▪ Modbus/TCP Server, supporting Modbus Conformance classes 0, 1, and 2. 

▪ Modbus/TCP Client, supporting Modbus Conformance classes 0, 1, and Function Codes 15, 22, 23, and 24 for Conformance class 2. 

▪ Remote PLC monitoring from a web browser 

▪ Comprehensive station management and diagnostic tools