HIMA EABT3 B9302 997009302 8 fold Output module

HIMA EABT3 B9302 997009302 8 fold Output module

INTRODUCTION

The controller is equipped with 8 digital outputs. The state (HIGH, LOW) of each output is signaled by an individual LEDAt the maximum ambient temperature, each of the outputs 1...3 and 5...7 can be loaded with 0.5 A, and outputs 4 and 8 can be loaded with 1 A or 2 A at an ambient temperature of up to 50 °C. If an overload occurs, one or all outputs are switched off. 

Product Characteristics

Input and output capabilities:

Although ‘8 Fold Output’ (i.e., 8 outputs) is not directly mentioned in the specific description, based on the module model and usage, it is reasonable to assume that the module may have multiple outputs for controlling multiple actuators at the same time. However, it is reasonable to assume that the module may have multiple outputs for simultaneous control of multiple actuators based on the module type and application.

Electrical parameters:

Operating voltage: typically 220V

Output frequency: May vary depending on the specific application, but the specific frequency is not directly mentioned in the reference article.

Power: May vary depending on the application, but is generally detailed in the product manual.

Physical Characteristics:

Physical parameters such as product size and weight may vary depending on the manufacturer and batch, please refer to the product manual or contact the supplier for accurate information.

Use Environment:

Typically suitable for indoor electrical control environments at room temperature and pressure.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

SPECIFICATIONS

Input voltage：110V-380V

Electric current：1A-30A

Power： 5W-130W

Warranty period：1 year

Stock Quantity：30

Place of origin：United States, France, Japan, Viet Nam, Australia, Russia, Germany, Italy, Arabia