GE FANUC IC693CPU351FM Advanced Modular CPU Controller

GE FANUC IC693CPU351FM Advanced Modular CPU Controller

Processor Speed:200 MHz Memory Capacity:32 MB RAM, 8 MB ROM Communication Interfaces:Ethernet, RS-485, DeviceNet, CANopen Operating Temperature:-10"C to 55"C Power Consumption:12 VDC (1.5 A) Dimensions:107 mm x 107 mm x 34 mm Mounting:Panel mount Operating System:GE Intelligent Platform Modular The GE FANUC IC693CPU351FM CPU controller module is engineered for demanding industrial applications, providing exceptional processing speed and robust memory capacity to handle complex control tasks efficiently. 

 Featuring a versatile communication suite, this module supports Ethernet for seamless integration with networked systems, RS-485 for serial data transfer, Modbus RTU for industry-standard connectivity, and CANopen for high-performance, real-time communication in harsh environments. With an operating temperature range from -20"C to +70"C, it ensures reliable operation across a wide range of industrial conditions, making it suitable for both indoor and outdoor applications. Compact yet powerful, the IC693CPU351FM measures 89 mm in width, 146 mm in height, and 102 mm in depth, allowing for efficient use in space-constrained environments. 

Its low power consumption of up to 15 W ensures minimal energy use without compromising performance. Designed for durability and reliability, this CPU controller module meets stringent industrial standards, ensuring long-lasting service and minimizing maintenance requirements. It is an ideal choice for upgrading or expanding existing automation systems to achieve higher levels of productivity and efficiency. The GE FANUC IC693CPU351FM is a high-performance modular CPU controller module designed for efficient and reliable industrial automation systems. It is ideal for applications requiring robust control capabilities, enhanced communication options, and compatibility with various fieldbus networks.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module