GE Fanuc IC695SPF002 Process Automation Control System

IC695SPF002 Process Automation Control System

Processor Speed:100 MHz Memory Size:2 MB Operating Temperature:-10"C to +60"C Power Consumption:鈮?2.5 W Communication Interfaces:RS-232, RS-485, Ethernet Dimensions (WxDxH):145 x 145 x 73 mm The GE Fanuc IC695SPF002 PAC System is a highly scalable platform tailored for complex industrial control systems. It boasts an intuitive user interface and supports a wide array of communication protocols, ensuring efficient data exchange and control over various devices. Featuring a robust Intel processor and ample memory options, this system ensures fast response times and reliable operation under demanding conditions. 

Its comprehensive set of onboard interfaces facilitates seamless integration with diverse field devices and control components. Engineered with industrial-grade materials, the IC695SPF002 is designed to withstand harsh environmental conditions without compromising on performance or reliability. It comes equipped with an extensive range of software tools and libraries, enabling users to develop sophisticated control strategies and monitor system health in real-time. Ease of installation and maintenance is a key feature of this system, thanks to its modular design and standardized interfaces. This not only simplifies the setup process but also ensures ease of access for routine checks and updates. 

 The IC695SPF002 is an ideal choice for manufacturers looking to enhance their production efficiency and accuracy. With its powerful processing capabilities, extensive connectivity options, and user-friendly design, it streamlines operations and optimizes resource utilization across various industrial sectors. The GE Fanuc IC695SPF002 PAC System is an advanced programmable automation controller designed for complex industrial applications, offering high performance, reliability, and ease of integration. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module