IS420ESWAH5A | General Electric IONet Switch

IS420ESWAH5A | General Electric IONet Switch

Product Description P/N: DS200PLFMG1A DESCRIPTION / SPECIFICATIONS Description The DS200PLFMG1A from General Electric is a Phase Logic Fault Board designed for fault detection in electrical systems. It monitors phase conditions and identifies faults, facilitating reliable operation and protection. The board ensures accurate fault logging and effective fault management in complex systems. Technical Specifications Brand General Electric Category PLCs/Machine Control Part Number DS200PLFMG1A Subcategory Industrial Computer Board Series Mark V Product Type Phase Logic Fault Module Functional Acronym/Abbreviation PLFM Number of Phases 3; A, B, and C Number of LEDs in Each Phase Six Information About DS200PLFMG1A 

 The DS200PLFMG1A is a Phase Logic Fault Board designed by General Electric for the Mark V series of industrial computer systems. This module is critical for monitoring and diagnosing phase logic faults within three-phase power systems, ensuring reliable operation and early detection of potential issues. As a Phase Logic Fault Module, the DS200PLFMG1A is equipped to handle fault detection across three distinct phases: A, B, and C. 

It provides comprehensive monitoring by continuously assessing the integrity and performance of each phase. This capability is essential for maintaining the stability and efficiency of industrial power systems, where phase imbalances or faults can lead to operational disruptions and equipment damage. The module features a total of six LEDs per phase, allowing for clear and immediate visual indication of fault conditions. These LEDs provide a straightforward method for operators to quickly assess the status of each phase and identify any issues that may require attention. The use of multiple LEDs enhances diagnostic accuracy and aids in faster troubleshooting by indicating the specific nature of faults. 

 The DS200PLFMG1A's design ensures reliable performance in industrial environments, contributing to the overall robustness of the Mark V control systems. Its ability to monitor and indicate faults across all three phases makes it an essential tool for maintaining the health and efficiency of complex power systems. In summary, the DS200PLFMG1A Phase Logic Fault Board by General Electric is an advanced diagnostic module that plays a key role in monitoring three-phase power systems. 

With its comprehensive fault detection capabilities and clear LED indicators, it provides valuable insights into phase logic conditions, helping to ensure system reliability and operational continuity in industrial applications. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. 

The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required