GE IS420ESWBH IS420ESW Ethernet Switch with Fiber, Designed for Industrial Control

IS420ESWBH IS420ESW Ethernet Switch with Fiber, Designed for Industrial Control

Operating Mode:Industrial Ethernet Port Type:Fiber Data Rate:100Base-TX, 100Base-FX Connection Type:LC, RJ45 Operating Temperature:-40"C to 70"C Power Supply:DC 24V Environmental Rating:Class 2, Zone 2 Locations Mounting Options:Parallel or Perpendicular The GE IS420ESWBH series offers a robust solution for industrial networks, ensuring seamless communication between devices in various environments. With support for both copper and fiber optic connections, these switches provide flexibility in deployment, catering to diverse industrial settings including Class 2, Zone 2 locations. 

 Equipped with advanced protocols for enhanced network performance, these switches are compatible with GE  Mark VIe series, integrating seamlessly with existing infrastructure. Engineered with durability in mind, they feature extended temperature tolerance and robust protection against environmental hazards, ensuring reliable operation under extreme conditions. Easy to install and manage, these switches come with intuitive software tools for configuration and monitoring, simplifying network setup and maintenance processes. Our GE IS420ESWBH1A, IS420ESWBH2A, and IS420ESWBH3A Ethernet switches are designed for industrial control applications, offering high-speed and functional connectivity through fiber ports.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module