LTi DRiVES LSP08-028-320-30-BPH2MY17E0803 Servo Motor
The LTi DRiVES LSP08-028-320-30-BPH2MY17E0803 Servo Motor is a permanent magnet synchronous motor for industrial motion control. It belongs to the LSP08 motor family, which is used with compatible LTI and LUST servo drives. The motor is designed for applications requiring accurate torque, speed, and position regulation.
The type code contains important selection information. LSP08 identifies the motor series and mechanical size. The 028 and 320 values relate to motor length, winding, and voltage class. The 30 value provides additional performance information. BPH2 and MY17E0803 identify feedback and design features. These details help users match the motor to the drive, mechanics, and machine process.
Motor Design
This motor uses permanent magnet synchronous technology. The rotor has permanent magnets and no rotor winding. This design provides high efficiency, low inertia, and fast dynamic response. The stator winding is designed for operation with a servo controller that supplies controlled current and voltage. The housing supports mechanical stability and heat dissipation.
The LSP08 series is suitable for industrial machines with frequent acceleration and deceleration. Low rotor inertia helps the drive achieve short cycle times. The motor can be mounted in different orientations. Correct alignment between the motor shaft and the load is important. A suitable coupling should be used to limit radial and axial forces.
Feedback and Control
The MY17E0803 feedback option provides rotor position and speed information to the drive. This feedback is required for synchronous motor commutation and closed loop control. The drive uses the signal to regulate current, speed, and position. Shielded cables and proper grounding are important for signal quality. Incorrect feedback settings can cause rough running, direction errors, or drive faults.
When paired with a compatible servo drive, the motor can operate in torque, speed, and position modes. Torque mode is used for tension and force control. Speed mode supports rotary axes and conveyors. Position mode is used for indexing and synchronized motion. The drive must be configured with the correct motor data set.
Connection Cables
The motor is used with connection cables for power and feedback. Power cables must be sized for the motor current and installed with proper shielding. Feedback cables must be shielded and routed away from power cables. Connectors must be clean and secure. Cable length and routing affect signal quality and electromagnetic compatibility.
Before commissioning, check cable continuity and insulation. Verify pin assignments against the drive and motor documentation. Do not connect or disconnect feedback cables while power is applied. Proper cable management reduces the risk of faults and improves long term reliability.
Performance
The LSP08-028-320-30-BPH2MY17E0803 is designed for continuous and intermittent duty. Continuous torque depends on cooling, ambient temperature, altitude, and load profile. The drive thermal model should match the motor. Overload capability is available for short periods, but the exact limits depend on the application.
The motor provides smooth torque and accurate positioning when installed and tuned correctly. Mechanical rigidity, coupling alignment, and drive tuning all affect final performance.
Installation and Commissioning
Mount the motor on a rigid surface with the correct flange. Tighten screws to the specified torque. Check coupling alignment. Connect protective earth securely. Route power and encoder cables separately. Enter motor data into the drive. Set feedback type and verify encoder direction. Run the motor at low speed without load. Confirm direction and stopping behavior. Then tune speed and position loops. Set current limits and ramps. Record parameters and backup the configuration.
Applications
The LTi DRiVES LSP08-028-320-30-BPH2MY17E0803 is suitable for packaging, printing, handling, textile, and general automation. It can control feed axes, rotary axes, and small to medium power servo applications.
Maintenance
Inspect bearings, cables, connectors, and cooling surfaces periodically. Check for unusual noise, vibration, and temperature. Feedback connectors must be clean and secure. If the motor is replaced, update the drive parameters to match the new motor and feedback system.
In summary, the LTi DRiVES LSP08-028-320-30-BPH2MY17E0803 Servo Motor provides efficient synchronous servo operation. It combines robust construction, feedback based control, and high dynamic response for industrial motion systems.
