LTi Drives Product DVD 11/2012 ID No. 0920.0034.14
The LTi Drives Product DVD dated 11/2012 with ID No. 0920.0034.14 is a technical documentation medium for LTi drive products. It is used by machine builders, commissioning engineers, and maintenance teams to access product information, parameter references, and software tools. The DVD supports the setup, operation, and service of compatible LTi and LUST drive systems.
The identification number 0920.0034.14 helps with archive control and version tracking. The 11/2012 date indicates the documentation release period. This information is important when matching documentation to a specific drive generation, firmware level, or machine project.
Content Purpose
A product DVD of this type typically contains manuals, data sheets, parameter lists, dimensional drawings, and application notes. It may also include setup software, firmware files, communication descriptions, and diagnostic guides. The content helps users understand drive functions, wiring requirements, feedback options, and safety notes.
For commissioning, the documentation supports motor data entry, feedback configuration, control loop tuning, and input and output assignment. For maintenance, it provides fault code explanations, replacement procedures, and spare part references. This reduces downtime and helps service personnel work with accurate information.
Use in Drive Systems
LTI and LUST drive systems are used in packaging, printing, textile, handling, machine tool, and wind energy applications. The DVD documentation covers product families such as servo controllers, frequency inverters, servo motors, line filters, and braking resistors. It allows users to check compatibility between drives, motors, and accessories.
Parameter references are especially important. Drive behavior depends on correct settings for current limits, speed limits, ramps, feedback type, and communication. The DVD helps users find the correct parameter numbers and allowed value ranges. It also explains diagnostic messages and recommended actions.
Installation and Access
The DVD is used on a computer or service laptop. Users should ensure that the computer has a suitable reader and that the operating system can open the included files. Documentation may be provided in several languages and formats. Users should check the release date and version to ensure that the information matches the installed drive firmware.
It is good practice to copy relevant manuals and parameter lists to a secure service archive. This allows quick access during maintenance. The archive should be organized by product family, model code, and firmware version. When a drive is replaced or updated, the documentation should be checked for changes.
Commissioning Support
During commissioning, the DVD can be used to review wiring diagrams, terminal assignments, and control interface descriptions. It helps users verify that the drive is connected correctly and that the motor data matches the nameplate. The documentation also explains how to perform test runs, tune control loops, and record final parameters.
For complex systems, the DVD may include communication manuals for fieldbus and industrial Ethernet options. These manuals describe network settings, data mapping, and diagnostic functions. Correct communication setup is essential for coordinated motion and remote monitoring.
Maintenance and Service
Maintenance teams use the DVD to identify spare parts, understand fault codes, and follow replacement procedures. It supports preventive maintenance planning by describing inspection intervals and wear parts. If a fault occurs, the documentation helps narrow the cause by listing possible sources such as wiring, feedback, supply voltage, or mechanical overload.
The DVD should be stored in a clean, dry place. If the original medium is damaged, a replacement documentation set should be obtained through the correct technical channel. Always verify that the documentation version matches the drive hardware and software.
Summary
The LTi Drives Product DVD 11/2012 ID No. 0920.0034.14 is a practical reference for LTi drive products. It supports selection, installation, commissioning, diagnostics, and maintenance. With correct version control, it helps engineers and technicians work efficiently and safely with compatible LTi and LUST drive systems.
