LTi Drives SO84.016.1030.0000.0 ServoOne Drive Controller

Product Overview

The LTi Drives SO84.016.1030.0000.0 is an industrial ServoOne drive controller identified by its extended model designation. The supplied product information lists an apparent power rating of 11 kVA. This value should be verified against the physical nameplate and the manufacturer's technical documentation before it is used for electrical design or equipment selection.

Servo drive controllers regulate electrical power supplied to compatible motors and form part of a coordinated motion control system. Depending on the installed configuration, the controller may support controlled motor movement, configurable operating modes and monitoring through the connected automation architecture.

Power Rating and Electrical Selection

The listed 11 kVA figure provides a useful reference when identifying the controller's apparent power class. Apparent power in kVA is not interchangeable with real power in kW. The relationship depends on electrical conditions and power factor, so the figure should not be converted into a motor power rating without the appropriate technical information.

Before installation, confirm the rated input voltage, current, permissible output conditions, overload capacity, cooling requirements and protective device recommendations. The selected motor must be compatible with the controller's verified electrical and control characteristics.

ServoOne Motion Control

A ServoOne installation may include a controller, compatible motor, feedback equipment and a higher level machine control system. The drive processes command references and manages motor behavior according to configured parameters. Actual control functions depend on the model variant, firmware and available interfaces.

The complete designation SO84.016.1030.0000.0 should be preserved during identification and replacement planning. Confirm the meaning of configuration fields through the applicable documentation rather than inferring specifications from the model code.

Industrial Applications

Industrial servo drives are used in automated machinery where controlled motion and coordinated operation are required. Potential application categories include manufacturing systems, production equipment, material handling and specialized machine tools. Suitability depends on the motor load, required speed and torque, dynamic performance and duty cycle.

Installation and Commissioning

Qualified electrical personnel must install the controller according to the applicable ServoOne instructions. Isolate the power supply before making connections and follow the prescribed procedures for grounding, cable routing, motor wiring and cooling.

Commissioning should include checking the motor nameplate data, feedback configuration, command source and protective limits. Test the control response under safe conditions and verify that the motor and machine behave as intended before enabling normal production operation.

Diagnostics and Maintenance

When investigating faults, review diagnostic messages and check the electrical supply, motor wiring, feedback signals and configuration parameters. Keep a record of the original settings and model designation when planning a replacement.

Before substituting a controller, verify the complete SO84.016.1030.0000.0 code, power requirements and compatibility with the existing machine. Accurate technical verification helps reduce installation errors and supports dependable motion control.