LTi Motion SO84.032.0173.0100.1 Servo Drive
Product Overview
The LTi Motion SO84.032.0173.0100.1 is an industrial ServoOne drive identified by its complete model designation. The supplied product details list a current value of 32.0 A, an apparent power value of 22.2 kVA and software version 4.20-08. These identifiers are useful when documenting the equipment, evaluating compatibility and planning maintenance.
The listed electrical values should be checked against the original nameplate and the applicable product documentation. In particular, the definition of the current rating and the operating conditions associated with the apparent power value must be confirmed before the data is used for electrical design.
Servo Drive Operation
A servo drive controls electrical power delivered to a compatible motor and responds to command references from the machine control system. Depending on the supported configuration, a servo system can regulate motion according to the requirements of an industrial process.
Drive performance depends on the controller, motor, feedback equipment, mechanical load and configured parameters working together. The SO84.032.0173.0100.1 should therefore be assessed as part of a complete motion control installation rather than as an independent component.
Electrical Ratings and System Selection
The listed 32.0 A current value and 22.2 kVA apparent power value provide initial identification information. They should not be treated as interchangeable ratings or as sufficient information for selecting a motor. Confirm input voltage, output characteristics, overload capability, cooling requirements and applicable protection devices from the relevant technical documentation.
Apparent power in kVA differs from real power in kW. Their relationship depends on electrical conditions and power factor, so a conversion should not be made without the required specifications.
Software and Configuration
The supplied software version is identified as 4.20-08. Record this information when maintaining the system because software compatibility can matter when configuring, diagnosing or replacing drive equipment.
Before making configuration changes, preserve the existing parameter set and verify the motor data, command source, feedback interface and operating mode. Any software update or replacement procedure should follow the instructions applicable to the exact hardware and software combination.
Industrial Applications
Industrial servo drives are used in production equipment, automated machinery, handling systems and other applications requiring controlled motor operation. Application suitability depends on the load profile, speed range, torque demand, acceleration and operating duty.
Installation and Commissioning
Qualified personnel should perform installation according to the applicable ServoOne documentation. Isolate electrical supplies before connecting power and control wiring. Verify grounding, cable routing, motor connections, feedback signals and cooling arrangements.
Commissioning should confirm motor parameters, control references, protective limits and diagnostic status. Test the motor response under controlled conditions before enabling normal machine operation.
Maintenance and Replacement
Routine checks should include terminals, wiring, cooling paths and signs of abnormal heating. Investigate fault codes and verify the supply and feedback systems before concluding that the controller requires replacement.
When replacing the drive, verify the complete SO84.032.0173.0100.1 designation, current and apparent power requirements, software compatibility and supported interfaces. Accurate identification supports reliable integration into industrial motion systems.
