LUST LTi Drives CDA34.017.W3.0 Drive System
Product Identification
The LUST LTi Drives CDA34.017.W3.0 is an industrial drive controller identified by the CDA34.017 model designation and W3.0 configuration. The supplied product record associates this unit with a 7.5 kW output rating, a stated frequency range of 0 to 400 Hz and software version V3.70-04. These identifiers are useful when reviewing the installed drive, preparing maintenance documentation or comparing equipment variants.
Accurate identification is important because an industrial controller is selected according to electrical characteristics, software configuration, motor compatibility and application requirements. A similar model name does not guarantee that two controllers have the same hardware, control features or permitted operating conditions.
Software Version and Configuration
The V3.70-04 software designation should be recorded during equipment inspection. Software information can help engineers identify the configuration of a drive and determine whether a proposed replacement is suitable for the installed application. Before modifying the system, record the existing parameter settings and review any compatibility requirements associated with the controller and machine control software.
Configuration management should include motor data, command sources, operating modes, protection limits and any communication settings used by the installation. Changes should be made only by personnel familiar with the drive and the machine's control architecture.
Power and Frequency Considerations
The listed 7.5 kW rating provides a useful initial reference for assessing the controller's intended power class. Actual motor compatibility depends on the complete electrical specification, including voltage, current, overload requirements, cooling and duty cycle.
The stated 0 to 400 Hz frequency range should be considered alongside the motor's permitted speed and mechanical limits. A controller's available output frequency does not automatically mean that every connected motor can operate safely across that range. The motor manufacturer’s requirements and the drive configuration remain essential.
Integration into Industrial Machinery
The controller can be assessed for applications requiring regulated motor operation in automated machinery. Integration planning should consider the electrical supply, motor, mechanical load, control signals and machine protection system as a complete arrangement.
Before commissioning, confirm the signal assignments, reference scaling, motor direction and relevant operating limits. Verify any optional interfaces from the actual unit rather than assuming that a feature is available because another CDA34 variant supports it.
Installation and Service
Installation and service work must follow the instructions for the exact model. Isolate the power supply before opening the enclosure or changing wiring. Check grounding, cable connections, ventilation and mounting conditions before returning the drive to operation.
During troubleshooting, review fault messages, power supply conditions, motor wiring and stored configuration data. If replacement is required, compare the complete model designation, hardware configuration and software requirements with the proposed substitute.
Replacement Planning
For maintenance teams, retaining a clear record of the CDA34.017.W3.0 model, the V3.70-04 software designation and the verified electrical ratings can reduce identification errors. Any replacement should be assessed against the actual machine application, not only the product family name.
The LUST LTi Drives CDA34.017.W3.0 is identified by a specific controller configuration and software version. Careful documentation and compatibility checks help support dependable operation throughout the service life of an industrial drive installation.
