LUST LTi LSH-074-2-30-560/T1 B S4 G6.1M Servomotor
The LUST LTi LSH-074-2-30-560/T1 B S4 G6.1M is a synchronous servomotor from the LSH series. It is designed for precise motion control in industrial machines. The motor uses a 560V DC bus design and is identified with article number 11712090. It is intended for use with compatible LTi Drives controllers in demanding automation axes.
Product Overview
The LSH-074-2-30-560/T1 provides high torque density and smooth dynamic response. It is suitable for applications that require accurate positioning, fast acceleration, and stable speed under load. The T1 thermal sensing feature helps the drive monitor motor temperature and protect the winding during operation.
Design and Construction
The motor has a robust housing and mounting flange for mechanical stability. Its rotor is designed for low inertia and rapid response. High quality bearings support the shaft and contribute to smooth running. The stator winding is optimized for efficient torque production and controlled thermal behavior. The mechanical interface allows integration into standard servo axes.
Performance Characteristics
The LSH-074-2-30-560/T1 delivers reliable torque for acceleration, deceleration, and continuous motion. It provides precise speed regulation and repeatable positioning when paired with a closed loop controller. Low torque ripple supports smooth operation at low speeds. Correct sizing and cooling are required for high duty cycles.
Feedback and Control
The B configuration, S4 feedback, and G6.1M option support accurate closed loop control. The motor can be used in position, speed, and torque modes with an appropriate LTi Drives servo controller. Motor parameters, current limits, and thermal protection must be configured correctly. Feedback cables should be shielded and separated from power cables.
Integration and Commissioning
Commissioning includes mechanical alignment, coupling inspection, and verification of power and feedback connections. The drive must be set with the correct motor data. Direction of rotation, limit switches, brake control, and thermal sensor input should be tested. Loop tuning should be performed with the machine load connected.
Applications
The LUST LTi LSH-074-2-30-560/T1 B S4 G6.1M is suitable for machine tools, packaging equipment, printing systems, handling machinery, robotics, textile machines, and special purpose automation. It is used where dynamic response and precise positioning are important.
Maintenance and Operational Care
Regular inspection should include bearings, shaft seals, cable connections, and contamination around the flange. The motor should operate within its rated temperature range. Unusual noise, vibration, or overheating may indicate misalignment, overload, or feedback problems. Correct installation and load limits support long service life.
Summary
The LUST LTi LSH-074-2-30-560/T1 B S4 G6.1M is a dynamic synchronous servomotor for advanced industrial motion control. Its 560V DC bus design, S4 feedback, and robust construction make it suitable for precise and repeatable automation tasks.
