RELIANCE 801421-4R Power Supply circuit board

RELIANCE 801421-4R Power Supply circuit board

About the 801421-4R

The 801421-2R is a small Power Supply circuit board produced by Reliance Electric Company. The card features a large transformer on the right edge that is marked TR-12367 411027-33R across the top. Next to the transformer is a large PCB mount electrolytic capacitor with a thick film resistor and two other screws attached to the top of it. These screws allow for a series of wires to be attached to the electrolytic capacitor. The circuit board section of this device is small and has twelve metal tabs across the top some of which have the wires attached that connect to the electrolytic capacitor. There are four yellow radial ceramic capacitors and a couple of smaller PCB mount electrolytic capacitors. There are seven signal diodes and a small integrated circuit. The small circuit board also has a few resistors. All of these components are held in a metal casing. On the back of this metal casing is a series of twelve screws that are used to attach additional wires to the device and a circular device labeled fuse.

Functionality

Voltage conversion: converts the input voltage into a stable voltage required inside the device.

Current protection: Provides protection against damage to the device in the event of excessive current or short-circuit.

Energy Efficiency Optimisation: Uses highly efficient power conversion technology to reduce energy loss and improve energy efficiency.

Electromagnetic compatibility: Good electromagnetic compatibility design to reduce interference with other electronic equipment.

Stability and Reliability: Ensure stable and reliable operation in various working environments.

Precautions

COMPATIBILITY: At the time of purchase and installation, it is necessary to ensure that the power supply circuit board is compatible with existing control systems and hardware devices.

Installation and Maintenance: Follow the installation instructions in the product manual for installation, and perform regular maintenance and inspection to ensure its normal operation.

Safe Use: In the course of use, relevant safety operating procedures and precautions should be observed to ensure the safety of personnel and equipment.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider