SELA36AI0150 | General Electric Molded Case Circuit Breaker

SELA36AI0150 | General Electric Molded Case Circuit Breaker

Product Description P/N: SELA36AI0150 Description / Specifications Description The SELA36AI0150 is a three-pole (3P), three-phase (3PH) Molded Case Circuit Breaker (MCCB) manufactured by General Electric as part of its Spectra Series. It has an amperage rating of 150A and a voltage rating of 600V. This circuit breaker offers a high interrupting capacity of 65kA at 480V, making it suitable for applications requiring robust protection against overcurrents. 

It features a current-limiting design and is configured for bolt-on mounting. Technical Specifications Part # SELA36AI0150 Category Circuit Breaker Subcategory Molded Case Circuit Breaker Frame Type SE150 120 Vac Interrupting Rating 100 KAIC 120/240 Vac Interrupting Rating 100 KAIC 240 Vac Interrupting Rating 100 KAIC 277 Vac Interrupting Rating 65 KAIC 480 Vac Interrupting Rating 65 KAIC 600 Vac Interrupting Rating 25 KAIC Trip Function Mag Only Continuous Current Rated Standard Suitable for Reverse Feed Yes Lugs TCAL18 Long Time No Instantaneous Adjustable Current Metering No Protective Relays No GSA Compliance No Information About SELA36AI0150 The SELA36AI0150 is a molded case circuit breaker manufactured by General Electric and belongs to the Spectra Series. It is designed as a three-pole (3P) circuit breaker suitable for three-phase (3PH) systems. 

With an amperage rating of 150A, it operates at a maximum voltage of 600V. This circuit breaker boasts a high interrupting capacity of 65kA at 480V, making it suitable for applications requiring robust overcurrent protection. Additionally, it features current-limiting capabilities, which help prevent excessive current flow during fault conditions. The SELA36AI0150 is designed for bolt-on mounting and is UL listed, ensuring compliance with safety standards. It is also suitable for reverse fed applications, providing versatility in various electrical setups. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required