TQD22175WL | General Electric Molded Case Circuit Breaker

TQD22175WL | General Electric Molded Case Circuit Breaker

Product Description P/N: TQD22175WL DESCRIPTION / SPECIFICATIONS Description The TQD22175WL is a General Electric Q-Line molded case circuit breaker, categorized under Type TQD, featuring 2 poles (2P) suitable for single-phase (1PH) applications. It possesses a current rating of 175A and a voltage rating of 240V, with an interrupting capacity of 10kA@240V, conforming to standard specifications. Equipped with a non-interchangeable trip unit and line & load side lug terminals, this breaker facilitates secure electrical connections. Operating within a temperature range of 40 degrees Celsius, it employs a feed-thru design and utilizes a thermal magnetic mechanism for circuit interruption. 

 Technical Specifications Part Number TQD22175WL Manufacturer General Electric Family Q-Line Poles 2 Ampere Rating 175 A Voltage Rating 240 V Phase Single Phase (1) Category Molded Case Circuit Breaker Connection Feed-Thru Type TQD Trip Unit LI - Long-Time and Instantaneous Protection Mechanism Thermal Magnetic Interrupting Capacity (AIC) 10kA at 240V Information About TQD22175WL The TQD22175WL is a molded case circuit breaker manufactured by General Electric under the Q-Line series. It is designed as a 2-pole, 1-phase breaker with a rated current of 175A and operates at a voltage of 240V. It possesses a standard interrupting capacity of 10kA@240V. The breaker is equipped with a non-interchangeable trip unit and features line and load side lug terminals. 

It functions within a temperature range of 40 degrees Celsius and is classified as a feed-thru, thermal magnetic molded case circuit breaker. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. 

QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included