YASKAWA YASNAC PC NC unit Controller PLC

YASKAWA YASNAC PC NC unit Controller PLC

INTRODUCTION

The YASKAWA YASNAC PC NC unit is a numerical control (NC) unit manufactured by Yaskawa Electric that combines the flexibility of a personal computer (PC) with the precise control capability of a numerical control system.The YASNAC PC NC unit is composed of two boards: JCP20 and JFC20  (JZNC-JFC10).  The PC NC unit is inserted  into a PC extended bus (ISA) inside the personal computer (PC) case. The  I/O module, servo unit, spindle drive, and motor are the same as those of  the YASNAC J100 CNC UNIT.

Specifications

Humidity：20% to 80% RH (with operation) 10% to 90% RH (with non-operation)

Vibration during operation：Less than 4.9m/s

Others：Free from dust, coolant, or organic solvent

PC NC Unit input power supply：+24VDC+10% 180V-264VAC

Battery

To determine whether the battery must be replaced, and replacement directions,  follow the steps below：

1. Press the Power OFF button.

2. Turn OFF the door interlock switch, if provided. (The power can be turned ON  with the door open.) 

3. Open the door to view the NC rack. 

4. Turn the power ON. If the Battery Alarm LED is displayed in the Message Bar  on the top portion of the screen, the battery must be replaced within 16 hours.  Do not use commercially-available batteries. Contact a Yaskawa customer service representative.  

5. If the battery must be replaced, turn the power OFF. Remove the battery from  the battery holder. 

6. Place the new battery in the holder and set the connector. (Note: the direction  of the connector is unimportant; however, poor connection may result in a lack  of conduction.).

Touch Screen

Clean the touch screen daily. Select PC Settings from the Utilities Menu. Select  the Touch Screen Cleaning button. When the screen below appears, proceed to  clean the touch screen.

1. Ensure there are no metal or other hard particles on the touch screen that may  scratch the screen. 

2. Use a general purpose liquid glass cleaner and a clean rag. 

3. Never spray glass cleaner directly onto the touch screen. Always spray onto  the clean rag. 

4. Wipe the touch screen completely. 

5. When finished, press the Escape key.

Technical features

High-precision control: Adopting advanced CNC technology to achieve high-precision and high-speed machining control to meet the machining needs of complex parts.

Flexibility: Based on the PC platform, users can customise software development and interface design according to their needs, improving productivity and flexibility.

Stability and Reliability: Strictly tested and verified to ensure stable operation even in harsh industrial environments and reduce downtime.

Application Areas

YASKAWA YASNAC PC NC unit is widely used in many fields such as machining, aerospace, automotive manufacturing, mould making, etc., especially in the occasions where high precision and high efficiency machining is required, such as 5-axis linkage machining, high-speed cutting, etc.

Precautions

When using the YASKAWA YASNAC PC NC unit, observe the relevant safety operating procedures to ensure the safety of personnel and equipment.

Perform regular maintenance and repair of the unit to extend its service life and keep it in good working condition.

In case of malfunctions or problems, contact YASKAWA's after-sales service personnel in a timely manner.