YOKOGAWA WU11 Interconnection Cable for SENCOM Sensor

YOKOGAWA WU11 Interconnection Cable for SENCOM Sensor

INTRODUCTION

The WU11 interconnection cable is specified for reliable transfer of digital signals between the SENCOM sensors and Yokogawa FLXA analyzer. It is especially designed to be installed in a heavy industrial environment. The double shielded cable will protect the connected devices for interference from high voltages and currents which are present on other cables. The cable is specified to be used in IP67 applications, allowing it to be submerged as a whole. The cable has a wide temperature operation range which is sufficient for most of the applications. The materials used for the cable are flame retardant to resist the spread of fire.

SPECIFICATIONS

Input voltage：110V-380V

Electric current：1A-30A

Power： 5W-130W

Warranty period：1 year

Stock Quantity：30

Place of origin：United States, France, Japan, Viet Nam, Australia, Russia, Germany, Italy, Arabia 

Warranty & Service

Yokogawa products are guaranteed free from defects in workmanship and materials under normal use and service for a period of (typically) 12 months from the date of shipment from the manufacturer. Individual sales organizations can deviate from the typical warranty period, and the conditions of sale relating to the original purchase order should be consulted. Damage caused by wear and tear, inadequate maintenance, corrosion, or by the effects of chemical processes are excluded from this warranty coverage. In the event of a warranty claim, the defective goods should be sent (freight paid) to the Service Department of the relevant Yokogawa Sales office for repair or replacement (at Yokogawa’s discretion).

The following information must be included in the letter accompanying the returned goods: 

• Model Code and Serial Number. 

• Original Purchase Order and Date. 

• Length of time in service and description of the process.

• Description of the fault and circumstances of the failure. 

• Process/environmental conditions that may be related to the failure of the cable. 

• Statement as to whether warranty or non-warranty service is requested. 

• Complete shipping and billing instructions for return of material, plus the name and phone number of a contact person that can be reached for further information. 

• Clean Statement Returned goods that have been in contact with process fluids must be decontaminated and disinfected prior to shipment. Goods should carry a certificate to this effect, for the health and safety of our employees. Material Safety Data sheets must be included for all components of the process to which the cable is been exposed.

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition