Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Safe use of "gas" to prevent not "burning"

F: | Au:佚名 | DA:2024-01-02 | 480 Br: | 🔊 点击朗读正文 ❚❚ ▶ | Share:



What is natural gas?

The natural gas used in our daily life is mainly composed of methane, which is a colorless, odorless, non-toxic and non-corrosive flammable gas. So when using natural gas, we need to pay extra attention.

What about a gas fire?

1. If the gas tank is on fire, call 119 and evacuate the house quickly.

2. When the gas tank is heated for a short time, the valve of the gas tank should be immediately closed and the power supply should be cut off in time.

3. If the gas tank is on fire for a long time or there is an open flame, remember not to close the valve or pour out with cold water! It could cause an explosion!

4. In this case, you should immediately flee to a safe place and wait for firefighters to come and deal with the burning gas tank.

5. When the fire brigade deals with it, the gas tank should also be evenly cooled before being put out.

6. Do not dump the burning gas tank on the ground! Because when the gas tank is upright, no matter whether it is equipped with a pressure reducing valve, there will generally be no explosion, and the gas (liquid) in the horizontal gas tank will flow out through the mouth of the bottle, and it is easy to explode.

Natural gas safety precautions

One, one on, three off.

After using gas, the stove switch and the stove front valve should be closed to prevent gas leakage. If you go out for a long time, you need to close the table front valve.

Second, when using gas, people should not stay away.

In the process of using the stove, people can not stay away from it to prevent gas leakage caused by boiling soup overflow or wind blowing.

Third, often check whether the hose connection is fixed with clips and whether the hose is aging and cracking.

In daily use, it is necessary to pay attention to inspection and timely repair to prevent gas stoves from leaking. The parts that are very easy to leak are: gas meter housing, various connection points on the gas pipeline, gas nozzle cock, rubber hose, etc. When the gas leakage reaches a certain concentration, it will explode when it encounters an open flame.

Fourth, long-term use of gas must pay attention to ventilation.

If you use gas for a long time, you must pay attention to ventilation. If the kitchen is not well ventilated, there will be insufficient oxygen in the kitchen after the use of gas stoves, which is easy to cause carbon monoxide poisoning. It is understood that a binocular gas stove, if installed in a kitchen with a volume of less than 6 cubic meters, should change air no less than 5 times per hour. It is best to install exhaust fans in the kitchen to make air circulation.

Fifth, immediately open the doors and Windows, and timely call the gas company telephone repair.

If you find that there is a smell near the gas stove, be sure to open the window immediately, and call the police in a safe area in time. At the same time, it is strictly prohibited to enter the room with all kinds of fire, and it is not allowed to switch on and off the light, smoke and make phone calls on the spot, so as to prevent gas explosion.

Six, we must use gas appliances that meet national standards, and it is strictly prohibited to use infrared stoves.

Gas appliances that meet national standards should be used, and infrared stoves are strictly prohibited. Infrared stoves will produce harmful gases due to inadequate combustion, which is easy to cause indoor poisoning.

7. Check the gas hose regularly and replace it in time when it expires.

The hose should be replaced every 18 months to prevent cracking, aging or hard and brittle; Check regularly to prevent rat bites; The hose should not exceed 2 meters, and both ends should be clamped tightly with pipe hoops; The hose can not be higher than the stove, so as not to be baked by the fire and cause accidents.

Ten inaccuracies of Gas Safety

1. Do not use multiple air sources in the kitchen. Users who use piped gas are strictly prohibited from using bottled liquefied gas or raw briquette fire in the kitchen.

2. Do not stack inflammable and explosive items in the kitchen to prevent fire and explosion accidents.

3. Do not tie ropes, wires or hang items on gas facilities, and do not set off firecrackers around gas facilities.

4. Gas users are not allowed to add, change, move or install gas facilities and gas metering instruments without authorization.

5. Do not occupy pressure or cover gas pipeline facilities.

6. Rooms equipped with gas pipelines and gas appliances are not allowed to be converted into bedrooms, living rooms and toilets.

7. Gas pipelines, valves, gas appliances and other gas facilities are not allowed to be sealed or installed secretly.

8. It is not allowed to move, cover, alter, destroy or remove the safety warning signs of gas facilities without authorization.

9. No illegal use of gas facilities, embezzlement or diversion of gas.

10. It is not allowed to open or close the valve box and gas meter box without authorization and damage the gas facilities.

What about gas leaks?

Test: Apply with soapy water to the location of possible air leakage, foaming indicates air leakage.

Listen: Gas leakage will emit a slight "silk" sound, hear similar sounds to pay attention.

Smell: Deodorant is added to natural gas to remind of gas leakage, if the home smells like rotten eggs, it may be a gas leak.

Look: When not in use, observe the gas meter, if the number changes, gas leakage may occur.

Usually use gas also pay attention

Family configuration of liquefied gas cylinders, stoves, pressure reducing valves, gas hoses, etc., must buy products that meet the relevant regulations of the state.

When using the gas, someone should be supervised to prevent the overflow of the soup from pouring out the flame or blowing out the flame by the wind, causing gas leakage and accidents.

Family configuration of liquefied gas cylinders, stoves, pressure reducing valves, gas hoses, etc., must buy products that meet the relevant regulations of the state.

When using the liquefied gas cylinder, it should be noted that the cylinder should be used upright, and avoid violent vibration, can not be exposed to the sun, and can not be placed on the cylinder.

If the gas is used for a long time, it is easy to make the indoor oxygen is insufficient, and the user should open the doors and Windows in time for ventilation. After the use of liquefied gas, the stove switch and liquefied gas valve should be closed in time.

Always check the hose and joint connected to the stove, and replace the hose immediately if it is found to be aging and loose; Gas appliances that have exceeded their service life should be updated in time.


  • Micro Innovation GF1-10TVA-100 Touch Panel
  • Micro Innovation GSO-57EQD-000 Operator Panel
  • Micro Innovation XN-2AI-U Analog Input Module
  • Micro Innovation CAN-4AI/UI Analog Input Module
  • Micro Innovation ZSB-1.5/8-S/S/-/PE Base Terminal
  • Micro Innovation AG XVH-340-57CAN-1-10 HMI Panel
  • Micro Innovation GSO-57EQD-000 Micro Panel
  • Micro Innovation XN-2AI-PT/NI-2/3 Input Module
  • Micro Innovation AG GF0-57SQD-000 Display Panel
  • MICRO INNOVATION AG XN-16DI-24VDC-P Input Module
  • Micro Innovation XN-2AI-PT/NI-2/3 Input Module
  • Micro Innovation MC2-442-57CQB-1-2G Display Panel
  • Micro Innovation XN-16DO-24VDC-0.5A-P Module
  • Micro Design MC200PROFI Programmable Module
  • Micro Innovation XV-252-57MPN-1-10 Micro Panel
  • Micro Innovation CAN-4AI/UI Analog Input Module
  • Micro Innovation GT1-MPI-A000 Panel
  • Micro Innovation MC2-440-10TVB-1-21 Display Panel
  • Micro Innovation XVS-430-57MPI-1-1S 6" HMI
  • Micro Innovation XV-442-57CQB-1-1AB Monitor
  • Micro Innovation ZSB-1.5/8-S/S/-/PE Base Terminal
  • Micro Design 895A Microfiche Reader
  • MICRO INNOVATION XNE-8DI-24VDC-P Input Module 8550100794
  • MICRO INNOVATION MICRO PANEL GF0-10CVD-002
  • Micro Innovation XN-PLC-CANopen Controller 85 50 274124
  • Micro Innovation Display Panel GS0-57E0D-000
  • MICRO INNOVATION CAN-32DI/P2X16 Input Module
  • MICRO INNOVATION XN-2DO-R-NO Relay Output Module
  • MICRO INNOVATION XNE-16DI-24VDC-P Input Module
  • Micro Innovation AG XN-2AI-U Analog Input Module
  • Micro Innovation XN-BR-24DC-D Power Supply
  • Micro Innovation MH2-342-57EIB-1-20 Panel
  • Micro Innovation XV-252-57MPN-1-10 Micro Panel
  • Micro Innovation Display Card EIB2-TP
  • Micro Innovation XV-252-57MPN-1-10 6" HMI
  • Micro Innovation XN-B3T-SBC 16x DO Base Module
  • Micro Innovation XVH-330-57MPI-1-10 Panel
  • Micro Innovation XN-BR-24VDC-D Power Module
  • Micro Innovation EIB2-TP EIB2TP Module
  • Micro Innovation GF0-10CVD-100 Touch Panel
  • MICRO INNOVATION XV-230-57CNN-1-10 HMI-PLC
  • MICRO INNOVATION XN-2DO-R-CO Relay Output Module
  • KMK MICRO INNOVATION GS2-90EMD-000 Micro Panel
  • Micro Innovation XN-2AO-U Analog Output Module
  • Micro Innovation XN-1AO-I Analog Output Module
  • Micro Innovation CAN-32DI/P-2x16 Rack Module
  • Eaton Micro Innovation MC2-440-10TVB-1-11 HMI
  • Micro Innovation AG CAN Bridge 8551224177
  • Micro Innovation XN-2AI-I Analog Input Module Set
  • Micro Innovation XN-4DI-24VDC-P Input Module
  • Micro Innovation Winbloc CAN-16DO/0.5A-PK Module
  • Micro Innovation Micro Panel GFO-10SVD-002 HMI
  • Micro Innovation CAN-24DI/8DO/0.5A-PK Module
  • Micro Innovation DP-24DI/8DO/0.5A-PK I/O Module
  • Weidmuller Micro Innovation CAN-BRIDGE ZSFA 1,5R
  • Micro Innovation CAN-3AI/1AO-UI Profibus Module
  • Micro Innovation PDP-TP Profibus DP Module
  • Micro Innovation CAN-3AI/1AO-UI Analog Module
  • Micro Innovation MC2-430-12TSB-10 HMI Panel
  • Micro Innovation XNE-8DO-24VDC-0.5A-P I/O Module
  • MICRO INNOVATION AG WINBLOC CAN-32DI/P-2x16 85 51 224182
  • MICRO INNOVATION AG WINBLOC CAN-4AO/UI 85 51 224195
  • Micro Innovation Xv-252-57cnn-1-10 HMI Panel
  • Micro Innovation XN Basis XN-S4T-SBBS-CJ 225200
  • Micro Innovation GF1-10TVD-100 Micro Panel
  • Micro Innovation XN-B3T-SBC 16-Fold DO Base Module
  • MICRO INNOVATION AG WINBLOC CAN-3AI/1AO-UI 85 51 224192
  • KMK Micro Innovation GS2-90EMD-000 Micro Panel
  • Micro Innovation MC2-430-10TVB-1-10 PanelView Terminal 24VDC
  • Micro Innovation XNE-8DO-24VDC-0.5A-P I/O Module 8550100795
  • MICRO INNOVATION GF1-10TVB-100 Touch Panel
  • MICRO INNOVATION AG WINBLOC CAN-4AI/UI Analog Input Module
  • MICRO INNOVATION AG WINBLOC CAN-32DO/0.5A-P-2x16 Output Module
  • MICRO INNOVATION AG CAN-32DI/P-2X16 8551224182 Input Module
  • MICRO INNOVATION MK2-230/232-57 Circuit Board 85 28 200000
  • MICRO INNOVATION CAN-BRIDGE 8551224177 CAN Bridge
  • Micro Innovation MC2-430-10TVB-1-10 Panel 24VDC
  • MICRO INNOVATION MC2-432-57CQB-1-10 HMI Panel
  • MICRO INNOVATION AG CAN-BRIDGE 85 51 224177 CAN Bridge
  • MICRO INNOVATION CAN-4AI/UI Analog Input Module
  • MICRO INNOVATION CAN-32DI/P-2X16 Input Module
  • SIGMATEK MDD111 09-404-111 Drive Module
  • SIGMATEK DVI021 Display Interface Module
  • SIGMATEK 00-450-024 C-IPC Processor
  • SIGMATEK MDD-111 MDD111 Drive Module
  • SIGMATEK ICA011 20-102-011 Interface Module
  • SIGMATEK 01-250-010-D NC4Kompakt Control Module
  • SIGMATEK CRIF081 12-751-081 Interface Module
  • SIGMATEK S1026-8AF61-R4E-Z57 Drive Module
  • SIGMATEK 9305.081.02 9227.082.00 Control Module
  • Sigma Tek 5000B-36 Attitude Indicator
  • SIGMATEK CEZ201 12-051-201-O Counter Module
  • SIGMATEK DPS001 Power Supply Module
  • SIGMATEK 994 395 01z Via Interface Module
  • SIGMATEK PC411-K 01-310-411-K Industrial PC
  • SIGMATEK 9816.324.00 Demag NC4 Keyboard
  • SIGMATEK ET261 90010C-71 Operator Terminal
  • SIGMATEK DDI 164 05-006-164 Input Module
  • SIGMATEK CCP 082 C-DIAS Processor Module
  • SIGMATEK CEZ201 12-051-201-O PLC Module
  • SIGMATEK MDD 1111 06178867 Drive Module
  • SIGMATEK S1 073-6AC61-RE-Y08-Z Drive Module
  • SIGMATEK MDD 111 Drive Module MDD111
  • SIGMATEK CSDI161 Safety Module 12-891-161
  • SIGMATEK C-IPC Processor 01-450-024
  • SIGMATEK DIAS DAM122 Analog Mixing Module
  • Sigma Tek 5000B-36 Attitude Gyro Indicator
  • SIGMATEK TMS012 Motherboard Module 05-250-012-T
  • SIGMATEK CCP-531 PLC Module
  • SIGMATEK DIAS DNC4 I/O Module 05-250-011
  • SIGMATEK AI088 Analog Input Module
  • SIGMATEK CEZ201 Counter Module
  • SIGMATEK CIC011 Industrial Computer Module
  • SIGMATEK MDM021 Motor Drive Module
  • SIGMATEK DTO163 Digital Output Module
  • SIGMA-TEK 5000B-36 Attitude Gyro
  • SIGMATEK DM161 Digital Input Module
  • SIGMATEK CCP-531 PLC Control Panel
  • SIGMATEK HZS773 Touch Terminal Operator Panel
  • SIGMATEK MDP101 3 KVA 45-65Hz Driver
  • SIGMATEK ETV1251 Touch Panel 12-230-1251
  • SIGMATEK CIO021 Safety Module 12-013-021
  • Sigma Tek 4000H-5 Directional Gyro
  • SIGMATEK TAE531 I/O Module 01-240-531
  • SIGMATEK DAI081 Input Module 05-009-081
  • SIGMATEK DCP640 Drive Control Module
  • SIGMATEK DCP643 Slides Module A6-29
  • SIGMATEK SCP011 Safety Module 20-890-011