Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Safe use of "gas" to prevent not "burning"

F: | Au:佚名 | DA:2024-01-02 | 327 Br: | 🔊 点击朗读正文 ❚❚ | Share:

What is natural gas?

The natural gas used in our daily life is mainly composed of methane, which is a colorless, odorless, non-toxic and non-corrosive flammable gas. So when using natural gas, we need to pay extra attention.

What about a gas fire?

1. If the gas tank is on fire, call 119 and evacuate the house quickly.

2. When the gas tank is heated for a short time, the valve of the gas tank should be immediately closed and the power supply should be cut off in time.

3. If the gas tank is on fire for a long time or there is an open flame, remember not to close the valve or pour out with cold water! It could cause an explosion!

4. In this case, you should immediately flee to a safe place and wait for firefighters to come and deal with the burning gas tank.

5. When the fire brigade deals with it, the gas tank should also be evenly cooled before being put out.

6. Do not dump the burning gas tank on the ground! Because when the gas tank is upright, no matter whether it is equipped with a pressure reducing valve, there will generally be no explosion, and the gas (liquid) in the horizontal gas tank will flow out through the mouth of the bottle, and it is easy to explode.

Natural gas safety precautions

One, one on, three off.

After using gas, the stove switch and the stove front valve should be closed to prevent gas leakage. If you go out for a long time, you need to close the table front valve.

Second, when using gas, people should not stay away.

In the process of using the stove, people can not stay away from it to prevent gas leakage caused by boiling soup overflow or wind blowing.

Third, often check whether the hose connection is fixed with clips and whether the hose is aging and cracking.

In daily use, it is necessary to pay attention to inspection and timely repair to prevent gas stoves from leaking. The parts that are very easy to leak are: gas meter housing, various connection points on the gas pipeline, gas nozzle cock, rubber hose, etc. When the gas leakage reaches a certain concentration, it will explode when it encounters an open flame.

Fourth, long-term use of gas must pay attention to ventilation.

If you use gas for a long time, you must pay attention to ventilation. If the kitchen is not well ventilated, there will be insufficient oxygen in the kitchen after the use of gas stoves, which is easy to cause carbon monoxide poisoning. It is understood that a binocular gas stove, if installed in a kitchen with a volume of less than 6 cubic meters, should change air no less than 5 times per hour. It is best to install exhaust fans in the kitchen to make air circulation.

Fifth, immediately open the doors and Windows, and timely call the gas company telephone repair.

If you find that there is a smell near the gas stove, be sure to open the window immediately, and call the police in a safe area in time. At the same time, it is strictly prohibited to enter the room with all kinds of fire, and it is not allowed to switch on and off the light, smoke and make phone calls on the spot, so as to prevent gas explosion.

Six, we must use gas appliances that meet national standards, and it is strictly prohibited to use infrared stoves.

Gas appliances that meet national standards should be used, and infrared stoves are strictly prohibited. Infrared stoves will produce harmful gases due to inadequate combustion, which is easy to cause indoor poisoning.

7. Check the gas hose regularly and replace it in time when it expires.

The hose should be replaced every 18 months to prevent cracking, aging or hard and brittle; Check regularly to prevent rat bites; The hose should not exceed 2 meters, and both ends should be clamped tightly with pipe hoops; The hose can not be higher than the stove, so as not to be baked by the fire and cause accidents.

Ten inaccuracies of Gas Safety

1. Do not use multiple air sources in the kitchen. Users who use piped gas are strictly prohibited from using bottled liquefied gas or raw briquette fire in the kitchen.

2. Do not stack inflammable and explosive items in the kitchen to prevent fire and explosion accidents.

3. Do not tie ropes, wires or hang items on gas facilities, and do not set off firecrackers around gas facilities.

4. Gas users are not allowed to add, change, move or install gas facilities and gas metering instruments without authorization.

5. Do not occupy pressure or cover gas pipeline facilities.

6. Rooms equipped with gas pipelines and gas appliances are not allowed to be converted into bedrooms, living rooms and toilets.

7. Gas pipelines, valves, gas appliances and other gas facilities are not allowed to be sealed or installed secretly.

8. It is not allowed to move, cover, alter, destroy or remove the safety warning signs of gas facilities without authorization.

9. No illegal use of gas facilities, embezzlement or diversion of gas.

10. It is not allowed to open or close the valve box and gas meter box without authorization and damage the gas facilities.

What about gas leaks?

Test: Apply with soapy water to the location of possible air leakage, foaming indicates air leakage.

Listen: Gas leakage will emit a slight "silk" sound, hear similar sounds to pay attention.

  • ABB 3HAC031851-001 SMB Unit Technical Manual
  • Fuji NB1U56X-01 Programmable Controller Guide
  • Siemens 6AG1153-2BA02-7XB0 SIPLUS IM 153-2 Manual
  • Beckhoff EL6631 PROFINET Terminal Manual
  • Lenze E82EV302-4C Frequency Inverter Manual
  • Siemens 6SE7038-6EK84-1JC2 IGD8 Board Specifications
  • Pilz 774595 Safety Relay Specifications
  • Fanuc A20B-8200-0847 PLC Board Specification
  • Allen Bradley 1785-L60B/E PLC CPU Manual
  • PASABAN MC-2006 03 PLC Card Specifications
  • B&R X20CP1382 PLC Control Module X20 CPU
  • B&R X20DC2395 PLC Module Digital Output
  • AS-2P-70M-B Industrial PLC Communication Cable 70M
  • Siemens 6ES7136-6BA00-0CA0 PLC Module ET 200SP
  • Siemens 1FK7083-5AF71-1EB3 Servo Motor SIMOTICS S
  • WAGO 750 Series I/O Modules 750-842 750-530 750-430 750-602 750-514 750-600
  • Microchip TC9401CPD F/V Converter 100kHz 14DIP
  • Mitsubishi GT2310-VTBA GT2310-VTBD HMI Touch Screen 10.4 Inch
  • Siemens 3RT2036-1AN20 AC Contactor SIRIUS
  • Mitsubishi GT2708 HMI Touch Screen GT2708-VTBA VTBD STBA STBD
  • Siemens 6FC5110-0CB01-0AA0 CNC PLC CPU
  • ABB SINT4130C PCB Board
  • Omron NX1P2-1040DT PLC Controller
  • Fuji FRN3.7C1S-2J VFD
  • PLC-60/75 /E2UK Shielded Braided Cable
  • Omron CJ1W-NC434 Position Control Unit
  • Omron NX-AD2208 Analog Input Module
  • PASABAN MC-2006 03 PLC Card
  • Schneider 9038CR34 Pressure Switch
  • Pilz 240340 Safety Control Module
  • Mitsubishi A2NCPU Programmable Controller MELSEC
  • Mitsubishi Alpha XL Alarm Modem M20 Expansion
  • AutomationDirect D0-06DD2-D PLC DL06 Controller
  • Toshiba COMW01-21 PCB Control Board Turbine
  • Siemens 6FX1122-1AC02 Coupling Module SINUMERIK
  • Omron CVM1-CPU21-V2 CPU Unit Programmable
  • Beckhoff EL7041 Stepper Motor Terminal EtherCAT
  • B&R X20AI4622 Analog Input Module 4 Channels
  • OAT PMC25.2-003 Programmable Controller Module
  • Fanuc A16B-2200-0350 Graphic Board Series 16
  • Eaton Cutler Hammer 6-26-2 Contactor Contact Kit
  • Omron D4SL-NSK10-LK-K Safety Switch
  • Siemens C98043-A7001-L24 CUD1 Control Board
  • Mitsubishi A2NCPUR21-S1 PLC Module
  • National Instruments NI-9242 4-channel analog input module
  • BEMAC UST-202-D PLC Interface Board
  • Omron CJ1W-DA08C Analog Output Module
  • Mitsubishi QX521 CNC Interface Board
  • Schneider BMEP586040 High-Performance PLC Processor
  • Emerson 5X00875G01 Process Control PLC
  • Siemens SIMODRIVE 611 Power Module 6SN1145-1AA01-0AA0
  • Siemens 840C NC-CPU 486DX4 6FC5110-0BB04-0AA1
  • Mitsubishi GT2708 Series Operation Panel Touch HMI
  • Fanuc A04B-0103-C220 Programmable Controller Module
  • IFM CR2530 Programmable Controller for Mobile Automation
  • Omron FH-3050 Vision Controller i7-2715QE High Performance
  • National Instruments NI-9242 4-Ch Analog Input Module
  • B&R X20AI4632 Analog Input Module 4 Channels
  • Pilz 773600 Input Module Safety Automation
  • Panasonic AFPX-C60P Programmable Controller PLC
  • Siemens 6ES7414-2XL07-0AB0 S7-400 CPU Manual
  • Cutler Hammer WM34V Interlock Kit Manual
  • Pilz 777587 Safety Relay Specifications
  • Omron CJ2H-CPU64-EIP CPU Module Manual
  • B&R X20AI1744-3 Analog Input Module Guide
  • Schneider LC1G185BEEA Contactor Specification
  • Sharp LM64P101 LCD Screen Specifications
  • B&R X20AT4222 Temperature Module Guide
  • Mitsubishi A2UCPU-S1 Controller Specifications
  • Stein Sohn E 083.1 Rack Module Technical Guide
  • Omron CK3W-AX1515N Motion Controller
  • Schneider TSXP572634M PLC Processor
  • Epson RAIOC-33 Programmable Controller
  • GRID T&D iRTUe-D1R1-W.125 I/O Module
  • Fanuc A20B-2002-0520 Control Board
  • B&R X20IF1030 Interface Module
  • Schneider ATV320U55N4B VFD
  • Omron NA5-9W001B-V1 HMI Touchscreen
  • Mitsubishi A2NCPU PLC CPU Unit
  • Omron CJ2M-CPU34 PLC CPU Unit
  • Omron NS12-TS01B-V2 Touch Screen HMI
  • Mitsubishi FX3GE-24MT/ESS PLC Controller
  • Grundig NEA02 AES 0 PLC I O Module
  • Beckhoff EP3204-0002 EtherCAT Box Module
  • Mitsubishi MDS-A-CV-220 Power Supply Unit
  • MCX20B2 080G0330 Motion Controller
  • Toyo Keiki P CARD5 Interface Board YH-212
  • National Instruments NI 9242 Analog Input Module
  • B&R 3AM055.6 PLC Module
  • Omron CJ1W-ETN21 Ethernet Module PLC
  • Allen-Bradley 2711P-T15C4A7 PanelView Plus 1500 Guide
  • Pilz 777602 Safety Module XV1P Specifications
  • NI cFP-2220 and cFP Modules Technical Guide
  • Keyence XG-EC80 Camera Input Unit Overview
  • Dynatronix CRS9-10 DC Power Supply Manual
  • Omron G3PW-A220EC-S-FLK Power Controller Manual
  • EVO SP SYSTEM PLC Control Panel Overview
  • B&R X20IF10G3-1 Interface Module Specifications
  • NL8060BC21-11 Industrial LCD Screen Specification
  • SK-G9-FAN1-F6 Cooling Fan Technical Specifications
  • US Drives 3000-4220-4-4 PLC Add-on Module
  • Allen-Bradley 2002-NX70-HSC4 High-Speed Counter
  • Schneider TM258LF42DR PLC Controller
  • Harris 8800-00002-02 PLC Power Control Center
  • NLT NL8060BC21-11C 8.4 LCD Panel
  • ABB PLUTO S20 V2 CFS Safety PLC
  • Omron NS12-TS00B-V2 NS12-TS00B-ECV2 HMI
  • 7-29 10 00 A PLC Expansion Module
  • B&R X20DC2395 PLC Module
  • Omron NE1A-SCPU02 Network Controller
  • GE IC200UEX624-C VersaMax Micro PLC
  • Rexroth GIV50-11 Position Limit Switch Assembly
  • B&R X20SLX410 Safety Logic Module
  • Omron CJ1W-NC433 Position Control Unit
  • Inovance AM600-CPU1608TP PLC Controller
  • ABB Pluto S20 V2 CFS Safety PLC
  • Omron CJ1W-NC113 Position Control Unit
  • Grundig NEA02 AES 0 PLC I O Module
  • Fanuc A16B-2202-0432 Control PCB Board
  • Siemens 6SN1124-1AA00-0DA0 Simodrive LT Module
  • B&R X20AO2632 Analog Output Module Specifications
  • Georges Renault 6159187760 PLC Board Technical Guide
  • IDEC PLC FC6A-D32K3CEE MicroSmart Controller Manual
  • 6ES7226-6BA32-0XB0 Fail-Safe Digital Input Guide
  • Programmable Controller PLC EC20-4040BRA Specification
  • Grundig PLC NEA02 AES 0 I/O Card Specification
  • Seiki POS-M 10-22-01 Card Positioning Board Manual
  • Ormec Systems PMC960 Motion Controller CPU Guide