Welcome to the Industrial Automation website!

NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

China's new energy and renewable energy development: opportunities, constraints

来源: | 作者:佚名 | 发布时间 :2024-01-30 | 727 次浏览: | Share:

I. Opportunities for the development of new and renewable energy in China

The development of new energy and renewable energy in China has good resource conditions, to cope with the needs of global climate change and to adapt to the grim reality of domestic "transformation mode and adjustment structure", which has created good internal and external conditions for the development of renewable energy in China. In recent years, China has promulgated and implemented the "Renewable Energy Law", which puts forward the target of 15% energy consumption by non-fossil energy by 2020, and puts forward higher requirements for the development of renewable energy. The State Council has made a decision on accelerating the cultivation and development of strategic emerging industries, taking new energy as an important part of China's strategic new industries, which has greatly promoted the development of China's new energy and renewable energy, achieved breakthrough progress in renewable energy technology, market and service system, and laid an important foundation for the large-scale development of renewable energy.

Actively promoted by the policy, the pattern of rapid development of new energy in our country has initially taken shape at present. In 2011, China's hydropower installed capacity exceeded 200 million kilowatts, ranking first in the world. The total installed capacity of wind power has reached 47 million kilowatts, about 100 times that of 2002, and has doubled over the years, ranking second in the world. Solar installed capacity reached 3 million kilowatts, becoming the fastest growing region in the world; The installed capacity of nuclear power plants is over 10 million kilowatts, with 27 units under construction, ranking first in the world. In the next ten years, China will gradually change the current coal-based energy structure, increase the proportion of high-quality fossil energy, and significantly increase the supply capacity of natural gas, nuclear energy and renewable energy.

By the end of 2010, the amount of renewable energy included in energy statistics such as hydropower, wind power and biological liquid fuel was about 262 million tons of standard coal, accounting for about 8.06% of the total energy consumption. Taking into account non-commercial varieties such as biogas and solar thermal utilization, the annual utilization of renewable energy is 306 million tons of standard coal, accounting for about 9.42% of the total energy consumption in the year. Compared with 2005, the contribution rate of renewable energy in China's 11th Five-Year Plan period is increasing at an average annual rate of 12.6%.

Second, the constraints facing the development of new energy and renewable energy in China

Grid-connected consumption difficulties. Grid-connected and consumption problems are the biggest bottlenecks restricting the effective use of new and renewable energy and industrial development in China. China's installed capacity of wind power has ranked first in the world, the growth rate of solar power generation ranks first in the world, because the actual power generation of new energy has a large gap compared with the design level, "wind abandonment", "light abandonment", power limiting phenomenon is serious, and the development is difficult to sustain. According to China's current relevant laws and regulations, new energy power must be unified through the large power grid after voltage enhancement, and distributed rooftop photovoltaic power generation, small-scale wind power generation, distributed natural gas multi-generation power plants are very difficult in our country.

Industrial behavior disorder. For a long time, China's renewable energy industry lacks clear and feasible development goals, coupled with the lack of technical standards and mandatory testing and certification systems, enterprises have no corresponding technical thresholds, and some projects have been launched without scientific decision-making, which once led to the "explosive" expansion of the industry. At present, polysilicon production, solar cells and wind power equipment manufacturing has far exceeded the market capacity. In order to seize the market, some products are put on the market in large quantities without any testing, resulting in vicious competition. Due to the small scale and scattered production enterprises such as polysilicon, energy consumption and material consumption are even more than twice that of foreign countries, which aggravate the pressure of energy conservation and emission reduction. At the same time, the quality of new energy generation is unsatisfactory, safety accidents are frequent, and industrial development is slowing down.

Critical technologies are lacking. The lack of key technologies has greatly hindered the formation of the competitiveness of China's new energy industry. China is heavily dependent on foreign countries in several key technologies and equipment fields of new energy, and 92% of the key components of China's fan rely on imports; 90% of the silicon materials and equipment needed for photovoltaic power generation are imported. The current popular advanced megawatt wind turbines, biomass direct combustion power generation boilers, solar photovoltaic polycrystalline silicon raw materials and other high-tech, high-value equipment and materials are also all dependent on imports. The lack of effective digestion, absorption and re-innovation of the technical equipment purchased with huge sums of money, and most of the profits are obtained by developed countries. Although China already has Goldwind, Suntech and other high-tech new energy enterprises that have the ability to compete with foreign manufacturers, the vast majority of new energy equipment manufacturers still have problems such as small scale, low degree of intensification, backward technology, and generally low product technical content and unstable quality, which can only meet low-end demand.

  • GE Hydran M2-X Transformer Condition Monitoring Device
  • FOXBORO P0916VL control module
  • FOXBORO P0916VC High Performance Terminal Cable
  • FOXBORO P0916WG system module
  • FOXBORO P0972ZQ interface channel isolation 8-input module
  • FOXBORO P0973BU high-frequency fiber optic jumper
  • FOXBORO P0926MX Splasher Confluencer
  • FOXBORO P0961S connector module
  • FOXBORO P0903NU system module
  • FOXBORO CM902WM control module
  • FOXBORO P0972VA ATS Processor Module
  • FOXBORO P0916Js digital input terminal module
  • FOXBORO PO961BC/CP40B control module
  • FOXBORO PO916JS Input/Output Module
  • FOXBORO PO911SM Compact Monitoring Module
  • FOXBORO P0972PP-NCNI Network Interface Module
  • FOXBORO P0971XU Control System Module
  • FOXBORO P0971DP Controller
  • FOXBORO P0970VB control module
  • FOXBORO P0970BP (internal) cable assembly
  • FOXBORO P0961EF-CP30B High Performance Digital Output Module
  • FOXBORO P0961CA fiber optic LAN module
  • FOXBORO P0926TM Modular I/O PLC Module
  • FOXBORO P0916BX series control system input/output module
  • FOXBORO P0916AG Compression Period Component
  • FOXBORO P0916AC I/A series module
  • FOXBORO P0912CB I/O Terminal Module
  • FOXBORO P0911VJ high-precision control module
  • FOXBORO P0911QC-C 8-channel isolated output module
  • FOXBORO P0911QB-C High Performance Industrial Module
  • FOXBORO P0903ZP Embedded System Debugging Module
  • FOXBORO P0903ZN control module
  • FOXBORO P0903ZL High Frequency Industrial Module
  • FOXBORO P0903ZE I/A series fieldbus isolation module
  • FOXBORO P0903NW Industrial Control Module
  • FOXBORO P0903NQ control module
  • FOXBORO P0903AA Industrial Control Module
  • FOXBORO FBM205 cable
  • FOXOBORO P0960HA I/A series gateway processor
  • FOXBORO P0926TP high-performance control module
  • FOXBORO P0926KL control module
  • FOXBORO P0926KK PLC system functional module
  • FOXBORO P0924AW wireless pressure transmitter
  • FOXBORO P0916NK differential pressure transmission cable
  • FOXBORO P0916JQ PLC module
  • FOXBORO P0916JP I/A series control module
  • FOXBORO P0916GG Digital Input Module
  • FOXBORO P0916DV I/A series digital input module
  • FOXBORO P0916DC Terminal Cable
  • FOXBORO P0916DB I/A series PLC module
  • FOXBORO P0914ZM recognition module
  • FOXBORO P0902YU control module
  • FOXBORO P0901XT Process Control Unit
  • FOXBORO P0800DV fieldbus extension cable
  • FOXBORO P0800DG Standard Communication Protocol Module
  • FOXBORO P0800DB Universal I/O Module
  • FOXBORO P0800DA Industrial Control Module
  • FOXBORO P0800CE control module
  • FOXBORO P0700TT Embedded System
  • FOXBORO P0500WX Control System Module
  • FOXBORO P0500RY Terminal Cable Assembly
  • FOXBORO P0500RU control module
  • FOXBORO P0500RG Terminal Cable
  • FOXBORO P0400ZG Node Bus NBI Interface Module
  • FOXBORO P0400GH fieldbus power module
  • FOXBORO FBM207B Voltage Monitoring/Contact Induction Input Module
  • FOXBORO FBM205 Input/Output Interface Module
  • FOXBORO FBM18 Industrial Controller Module
  • FOXBORO FBM12 Input/Output Module
  • FOXBORO FBM10 Modular Control System
  • FOXBORO FBM07 Analog/Digital Interface Module
  • FOXBORO FBM05 redundant analog input module
  • FOXBORO FBM02 thermocouple/MV input module
  • FOXBORO FBI10E fieldbus isolator
  • FOXBORO DNBT P0971WV Dual Node Bus Module
  • FOXBORO CP30 Control Processor
  • FOXBORO CM902WX Communication Processor
  • FOXBORO AD202MW Analog Output Module
  • FOXBORO 14A-FR Configuration and Process Integration Module
  • FOXOBORO 130K-N4-LLPF Controller
  • FUJI FVR004G5B-2 Variable Frequency Drive
  • FUJI FVR008E7S-2 High Efficiency Industrial Inverter
  • FUJI FVR008E7S-2UX AC driver module
  • FUJI RPXD2150-1T Voltage Regulator
  • FUJI NP1PU-048E Programmable Logic Control Module
  • FUJI NP1S-22 power module
  • FUJI NP1AYH4I-MR PLC module/rack
  • FUJI NP1BS-06/08 Programmable Controller
  • FUJI NP1X3206-A Digital Input Module
  • FUJI NP1Y16R-08 Digital Output Module
  • FUJI NP1Y32T09P1 high-speed output module
  • FUJI NP1BS-08 Base Plate​
  • FUJI A50L-2001-0232 power module
  • FUJI A50L-001-0266 # N Programmable Logic Control Module
  • GE GALIL DMC9940 Advanced Motion Controller
  • GE DMC-9940 Industrial Motion Control Card
  • GE IS200AEADH4A 109W3660P001 Input Terminal Board
  • GE IC660HHM501 Portable Genius I/O Diagnostic Display
  • GE VMIVME 4140-000 Analog Output Board
  • GE VMIVME 2540-300 Intelligent Counter
  • GE F650NFLF2G5HIP6E repeater
  • GE QPJ-SBR-201 Circuit Breaker Module
  • GE IC200CHS022E Compact I/O Carrier Module
  • GE IC695PSD140A Input Power Module
  • GE IC695CHS016-CA Backboard
  • GE IC800SS1228R02-CE Motor Controller
  • GE IS215WEMAH1A Input/Output Communication Terminal Board
  • GE CK12BE300 24-28V AC/DC Contactor
  • GE CK11CE300 contactor
  • GE DS3800NB1F1B1A Control Module
  • GE VMIVME2540 Intelligent Counter
  • GE 369B1859G0022 High Performance Turbine Control Module
  • GE VME7865RC V7865-23003 350-930007865-230003 M AC contactor
  • GE SR489-P5-H1-A20 Protection Relay
  • GE IS200AEPGG1AAA Drive Control Module
  • GE IS215UCCCM04A Compact PCI Controller Board
  • GE VME7768-320000 Single Board Computer
  • GE SR489-P5-LO-A1 Generator Protection Relay
  • GE IS215WETAH1BB IS200WETAH1AGC Input/Output Interface Module
  • GE D20 EME210BASE-T Ethernet Module
  • GE IS200EXHSG3REC high-speed synchronous input module
  • GE IS200ECTBG1ADE exciter contact terminal board
  • GE VPROH2B IS215VPROH2BC turbine protection board
  • GE F650BFBF2G0HIE feeder protection relay
  • GE SLN042 IC086SLN042-A port unmanaged switch
  • GE SR489-P1-HI-A20-E Generator Management Relay
  • GE IS400JPDHG1ABB IS410JPDHG1A track module
  • GE IS410STAIS2A IS400STAIS2AED Industrial Control Module