Welcome to the Industrial Automation website!

NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Analysis on effective measures of mine engineering construction safety management

来源: | 作者:佚名 | 发布时间 :2023-11-27 | 174 次浏览: | Share:

With the continuous development of China's social economy and the continuous improvement of people's living standards, the demand for mineral resources is getting higher and higher. Therefore, it is imperative to optimize the production of mineral resources and increase the output of mineral resources. However, because the mine engineering is relatively complex and the technical content is high, there are different degrees of safety problems in the actual construction, which seriously affect the construction safety of the mine engineering and hinder the normal construction. Therefore, it is necessary to learn the characteristics of mine engineering, master the main factors affecting the safety of mine engineering construction, and take corresponding measures to improve the safety of mine engineering construction and provide a strong guarantee for the normal construction of mine.

First, the three factors affecting the safety management of mine engineering construction

1.1 Environmental Factors

In terms of many factors affecting the current construction safety management of mining projects, the most typical and prominent one is the environmental factor. Usually, the construction environment of mining projects is harsh, the coefficient of change is unstable and the safety risks are frequent, such as the excessively high concentration of dust and unreasonable density of underground gas in mining projects, which easily lead to the casualties of construction personnel. In the event of wind, rain and other bad weather, the construction will stop, resulting in the delay of the construction schedule.

1.2 Material and equipment factors

Safety protection materials used in some mining projects often have hidden dangers of jerry-cutting, and there is no qualified safety protection materials with high safety performance purchased from the initial link, which is difficult to provide a strong guarantee for the life safety of construction personnel, making the probability of safety accidents in mining projects high. In addition, many mining engineering construction equipment in the aging damage and other conditions, the operation is not sensitive caused by disrepair is likely to occur fire, leakage and other accidents, at the same time with the rapid development of science and technology, mining engineering construction by the traditional sense of manual labor is gradually replaced by mechanical equipment. Therefore, the construction of mine engineering must be built on the basis of ensuring the efficient operation of mechanical equipment, in strict accordance with the relevant equipment requirements, the operation and construction of potential safety hazards in the bud.

1.3 It is difficult to guarantee the personal safety of construction personnel

Because there are many unsafe factors in the construction site of mine engineering, often accompanied by various toxic and harmful gases, harsh and high decibel noise, heat and dust and other problems, construction personnel working in this environment for a long period of time seriously threaten their own health due to high-intensity construction load, thus increasing the economic loss cost of mine engineering. In short, it should be deeply recognized that personnel are the main body of mine construction and directly determine the overall quality of mine projects. Therefore, the legitimate personal rights and interests of construction personnel should be fully guaranteed, and relevant government departments should also increase the capital investment in the hardware foundation of mine engineering. Construction personnel themselves should also do a good job of safety protection and carry out construction operations in a safe construction environment.

Second, six effective measures to improve the level of mine engineering construction safety management

2.1 Strengthen device security management and maintenance

The production efficiency of the company is directly related to the operation mechanism of the equipment, and the normal and safe operation of the equipment can ensure the smooth progress of mining activities and the life safety of the staff has a certain guarantee. Generally speaking, the occurrence of equipment accidents is mostly related to its lack of effective system management and maintenance. Regular maintenance work is conducive to timely discovery and timely treatment of problems in the equipment, improve the service life of the equipment, and avoid safety accidents caused by equipment operation problems.

The establishment of testing and information management system can significantly strengthen the safety management of equipment, maintain the normal operation of equipment, and ensure the maintenance quality of equipment. Enterprises should formulate a reasonable equipment management plan according to the actual situation of the project, analyze the use of equipment by each employee and each position, assign equipment maintenance work, and implement the responsibility system, so that when equipment accidents occur, people can be traced.

Enterprises should strengthen safety management, carry out regular training and assessment of maintenance workers, and constantly improve the technology of maintenance personnel to ensure that maintenance personnel can find problems in time and have the ability to deal with problems independently. For those identified equipment hazards that cannot be eliminated in time, a monitoring and tracking plan can be developed, a complete emergency plan can be designed according to the specific and major functions of the equipment, and every relevant staff member is informed. The company needs to carry out regular inspection of operating lines, set up working groups to conduct regular spot checks, and focus on monitoring and management of areas prone to danger.

  • ABB 3HAC5498-1 High-Performance Control Module
  • ABB 3HAC5518-1 Industrial Control Module
  • ABB 3HAC5497-1 Industrial Control Module
  • ABB 3HAC7344-1 Mains line filter unit
  • ABB 3HAC7681-1 Process Interface Module
  • ABB 3HAC6428-1/04 high-performance control module
  • ABB 3HAC6157-1 Floppy sign/supply cable
  • ABB 3HAC10847-1 Ethernet on front,Harness
  • ABB 3HAC5566-1 Industrial Communication Bus Cable
  • ABB 3HAC9710-1 Heat exchanger unit
  • ABB IMFECI2 Industrial Control Module
  • ABB IMDS014 Digital Slave Output Module
  • ABB INIT03 Control Module
  • ABB 3HAC031683-004 Cable Teach Pendant 30m
  • ABB HAC319AEV1 High-Performance Control Module
  • ABB UFC092BE01 Binary input module
  • ABB DAPC100 3ASC25H203 Industrial Control Board
  • ABB 57160001-KX DSDO 131 Digital Output Unit
  • ABB 3HAC4776-1/1 Industrial Control Module
  • ABB DSTF610 terminal
  • ABB YB560100-EA S3 Industrial Control Module
  • ABB XO16N1-B20 XO16N1-C3.0 High-Performance Industrial Control Module
  • ABB TU804-1 Programmable Logic Controller (PLC) Module
  • ABB TU515 I/O terminal unit
  • ABB TK516 Connection Cable with Contacts
  • ABB SPCJ4D34-AA Industrial Ethernet I/O System Module
  • ABB SPAD346C Integrated Differential Relay
  • ABB 1SAM101904R0003 SK-11 Signal contact 1NO+1NC
  • ABB SE96920414 YPK112A Communication Module
  • ABB SC610 3BSE001552R1 Submodule Carrier
  • ABB SC513 PLC Analog Input Module
  • ABB SAFT110 Advanced Safety Termination Module
  • ABB RVC6-5A Control Module
  • ABB RB520 Linear Motion Controller Module
  • ABB R1.SW2/3 Industrial Control Module
  • ABB PU517 Controller Automation System
  • ABB PS130/6-75-P Industrial Control Module
  • ABB 3BSE008062R1 PM633 Processor Module
  • ABB L110-24-1 Industrial Control Module
  • ABB IMDSO14 Digital Slave Output Module
  • ABB DSU10 Control Module
  • ABB DSQC627 3HAC020466-001 Advanced Power Supply Module
  • ABB DSQC354 Industrial I/O Module
  • ABB DSQC352 High Performance Input/Output Module
  • ABB 37911-4-0338125 Control Module
  • ABB DSPC172 CPU Module
  • ABB DSBB175 Industrial PLC Expansion Module
  • ABB CR-M4LS Industrial Control Module
  • ABB CI626A 3BSE005029R1 Communication Interface Module
  • ABB BB510 (DC5256) Digital Control Module
  • ABB 61615-0-1200000 High-Precision Industrial Controller
  • ABB 3HNE 00313-1 TILLV.0317 Machine No. 64-25653
  • ABB 3HNA000512-001 Control Module
  • ABB 3HAC025466-001 Industrial Control Module
  • ABB 3HAB8101-8/08Y Industrial Control Module
  • ABB 3BHB003689 Multifunction Controller Module
  • ABB PXBHE65 206-00212 power module
  • ZUNKU 6203-2RS Deep Groove Ball Bearing
  • ZUNKU 6201-2RS Deep Groove Ball Bearing
  • ZYCOM IGLACS01281 Control Module
  • Zygo 8010-0105-02 ZMI-501 Displacement Measurement Interferometer
  • Zygo 1115-801-346 laser head cable
  • ZYGO HSSDC2 TO HSSDC2 CABLE 1115-800-055
  • ZYGO HSSDC TO HSSDC2 CABLE 1115-800-056
  • ZYGO ZMI 4104C Measurement Electronics Board
  • ZYGO ZMI-2002 8020-0211 Measurement Board
  • ZYGO 7702 8070-0102-35 Laser Head
  • ZYGO ZMI 7702 8070-0102-01X Laser Head
  • ZYGO ZMI-4004 4-Axis VME64x Measurement Board
  • ZYGO PC200 CS1115-801-346 Laser interferometer cable
  • ZYGO 8010-0105-01 ZMI Power Supply
  • ZYGO ZMI-2002 8020-0211-1-J Laser system measurement board card
  • ABB 35AE92 control card
  • ABB 200900-004 I/O Adapter PLC Board
  • Siemens 6ES7193-4CA40-0AA0 ET 200S Electronic Module
  • Siemens 6AV2124-2DC01-0AX0 Comfort Panel
  • Siemens 6ES7421-7DH00-0AB0 Digital Input Module
  • Siemens 6ES7350-2AH01-0AE0 Counter Module
  • Siemens 6ES7231-0HC22-0XA0 Analog Input Expansion Module
  • Siemens ET200SP 6ES7193-6PA00-0AA0 server module
  • Siemens 6ES7193-4JA00-0AA0 Terminal Module
  • Siemens 6AG1204-2BB10-4AA3 Ethernet Switch
  • SIEMENS 6GK1105-2AA10 SIMATIC NET series optical switching module (OSM ITP62)
  • Schneider Modicon Quantum 140CPU65260 Unity Processor
  • Schneider Modicon Quantum 140ACO02000 Analog Output Module
  • Schneider Modicon Quantum 140CPS11420 power module
  • Allen-Bradley 1747-CP3 SLC ™ Series of programming cables
  • Kollmorgen S33GNNA-RNNM-00 - Brushless Servo Motor
  • Kollmorgen 6sm56-s3000-g-s3-1325 - Servo Motor
  • Kollmorgen AKM52K-CCCN2-00 - Servo Motor
  • Kollmorgen PSR3-230/75-21-202 - Power Supply
  • Kollmorgen akm24d-anc2r-00 - Servo Motor
  • Kollmorgen AKM22E-ANCNR-00 - Servo Motor
  • Kollmorgen S60300-550 - Servo Drive
  • Kollmorgen B-204-B-21 - Servomotor
  • Kollmorgen AKM21E-BNBN1-00 - Servo Motor
  • Kollmorgen TT2953-1010-B - DC Servo Motor
  • Kollmorgen pa8500 - Servo Power Supply
  • Kollmorgen BDS4A-210J-0001-207C2 - Servo Drive
  • Kollmorgen TTRB1-4234-3064-AA - DC Servo Motor
  • Kollmorgen MH-827-A-43 - Servo Motor
  • Kollmorgen AKM24D-ACBNR-OO - Servo Motor
  • Kollmorgen 00-01207-002 - Servo Disk DC Motor
  • Kollmorgen AKM21C-ANBNAB-00 - Servo Motor
  • Kollmorgen PSR3-208/50-01-003 - Power Supply
  • Kollmorgen 6SM56-S3000 - Servo Motor
  • Kollmorgen DBL3H00130-B3M-000-S40 - Servo Motor
  • Kollmorgen 6SN37L-4000 - Servo Motor
  • Kollmorgen AKM65K-ACCNR-00 - Servo motor
  • Kollmorgen 6SM56-L3000-G - Servo Motor
  • Kollmorgen AKMH43H-CCCNRE5K - Servo Motor
  • Kollmorgen PSR4/52858300 - Power Supply
  • Kollmorgen KBM-79H03-E03 - Direct Drive Rotary Motor
  • Kollmorgen AKM33E-ANCNDA00 - Servo Motor
  • Kollmorgen U9M4/9FA4T/M23 - ServoDisc DC Motor
  • Kollmorgen AKM13C-ANCNR-00 - Servo Motor
  • Kollmorgen AKM43L-ACD2CA00 - Servo Motor
  • Kollmorgen AKM54K-CCCN2-00 - Servo Motor
  • Kollmorgen M-605-B-B1-B3 - Servo Motor
  • Kollmorgen AKD-P00606-NBAN-0000 - Rotary Drive
  • Kollmorgen 6SM-37M-6.000 - Servo Motor
  • Kollmorgen A.F.031.5 - Sercos Interface Board
  • Kollmorgen 918974 5054 - Servo PWM
  • Kollmorgen U12M4 - ServoDisc DC Motor
  • Kollmorgen AKD-B00606-NBAN-0000 - Servo Drive
  • Kollmorgen MV65WKS-CE310/22PB - Servo Drive
  • Kollmorgen 65WKS-CE310/22PB - Servo Drive
  • Kollmorgen EM10-27 - Module