Welcome to the Industrial Automation website!

NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Practice points of compliance management of mine project construction

来源: | 作者:佚名 | 发布时间 :2023-11-28 | 276 次浏览: | Share:

1. Shortcomings of green mine construction

With the comprehensive promotion of green mine construction in our country, green mine construction work is more standardized, and the management process is becoming clear, but we should also clearly realize that there are still some shortcomings in green mine construction.

1. Low proportion of green mines built

At this stage, 953 mines included in the national green mine list, accounting for only about 1.5% of the total number of nearly 60,000 mines in the country, and mainly large and medium-sized mines. Although the existing green mines can play a certain demonstration role, the proportion of small and below mines in China still accounts for more than 80%, and the equipment and technology of small mines are generally backward, the comprehensive utilization level of mineral resources is low, and the task of green mine construction is still difficult.

2. The initiative of enterprises is not high

Some mining enterprises, especially small mines, old mines and mines with poor operating efficiency, think that the construction period of green mines is long and the investment is large, pay more attention to the immediate economic benefits, and carry out the enthusiasm and initiative of green mine construction is insufficient. Although some mining enterprises are forced by the current pressure of ecological environment protection, in the mining area greening, factory closure, dust suppression and other aspects of some work, but mostly pay attention to the appearance and ignore the inner.

3. The evaluation standard system is not sound enough

Although the Ministry of Natural Resources has issued nine national green mine construction industry specifications, there is still a lack of mining industry specifications such as geothermal mineral water, unconventional oil and gas, and radioactive minerals, and the current industry and local standards are recommended standards, and the nature of non-enforcement limits the function of standards and specifications. Meanwhile, there are more qualitative indicators in the current standards, but fewer quantitative indicators. It is also not conducive to its role. There is still a big gap between the number and level of existing standards and the goal of the green mine standard system that is fully covered by the major industries and is coordinated with national, industry, local and group standards. In addition, the corresponding evaluation index system still needs further research and improvement.

4. Lack of incentive support policies

Although No. 4 civilization has confirmed the supporting incentive policy framework for green mine construction in four aspects, including construction land, mineral resources, finance and taxation, and pointed out the direction for all localities to support green mine construction, only some provinces (regions and cities) have detailed and implemented some incentive policies. Some provinces (autonomous regions and municipalities) have copied the incentive support policies proposed in the construction plans or planning and other documents, and failed to develop supporting policies and measures that meet the local reality, which is not conducive to the implementation of incentive support policies.

5. The department coordination mechanism is weak

Although Document No. 4 was jointly issued by six ministries, including the former Ministry of Land and Resources, the former Ministry of Environmental Protection and the Ministry of Finance, and involved multiple functional departments such as natural resources, ecological environment, emergency management, finance and taxation in the actual promotion of green mine construction work, different departments have different management contents and standard requirements for mine production and operation. It failed to form a coordinated working mechanism of departments to effectively promote the construction of green mines and promote the green development of mining.

6. Low social cognitive participation

The social awareness and attention of green mine construction are mostly concentrated in the relevant researchers and managers in the field of natural resources, and there is a lack of influential network platforms or media for the green development of mining at this stage. At the same time, the social supervision system of green mine construction and the punishment mechanism of enterprise dishonesty are not perfect, and it is impossible to form effective social supervision of green mine construction of mining enterprises.

4 Suggestions for green mine construction

The smooth promotion of green mine construction needs the active guidance and support of management departments and the initiative of mining enterprises. This paper puts forward some suggestions to mining enterprises and management departments respectively.

2 Some suggestions for mining enterprises

2.1 Adapt to the new situation and new requirements, improve the enthusiasm and initiative

Since the 18th National Congress of the Communist Party of China, the construction of green mines has become an inevitable choice for the practice of ecological civilization in the mining field. Managers of mining enterprises should fully realize the importance and necessity of green development, take the initiative to change the concept of blindly pursuing simple economic benefits, adapt to the national green development and high-quality development requirements, and actively carry out green mine construction. The construction of green mines is not only conducive to the sustainable development of mining enterprises, but also can reduce costs in all aspects. For example, improving the mechanization and automation rate can reduce the threat to the safety of miners' lives and property and reduce labor costs; Carrying out ecological restoration and management in mining areas and paying attention to the harmony of mining communities can not only improve the lives of surrounding residents and enhance the overall welfare of the society, but also reduce the conflicts between mining and community residents and the potential coordination costs. Taking the initiative to carry out green mine construction can effectively reduce the risk of government regulation, avoid environmental penalties, and reduce legal costs. In addition, after the mining enterprises were included in the national green Mine List, they were announced to the society, which was also an advertisement for mining enterprises from the policy.

  • Metso A413177 Digital Interface Control Module
  • METSO A413222 8-Channel Isolated Temperature Input Module
  • Metso A413313 Interface Control Module
  • METSO D100532 Control System Module
  • METSO A413310 8-Channel Digital Output Module
  • METSO A413659 Automation Control Module
  • Metso D100314 Process Control Interface Module
  • METSO A413665 8-Channel Analog Output Module
  • METSO A413654 Automation Control Module
  • Metso A413325 Interface Control Module
  • METSO A413110 8-Channel Analog Input Module
  • METSO A413144 Automation Control Module
  • Metso A413160 Digital Interface Control Module
  • METSO A413152 8-Channel Digital Input Module
  • METSO A413240A Automation Control Module
  • METSO A413146 Digital Interface Control Module
  • METSO A413150 Multi-Role Industrial Automation Module
  • METSO A413125 Automation Control / I/O Module
  • Metso A413111 Interface Control Module
  • METSO A413140 Automation Control Module
  • METSO 020A0082 Pneumatic Control Valve Component
  • METSO 02VA0093 Automation Control Module
  • METSO 02VA0153 Actuator Control Module
  • METSO 02VA0190 Automation Control Module
  • Metso 02VA0193 Pneumatic Control Valve Component
  • METSO 02VA0175 Valve Actuator Module
  • METSO D100308 Industrial Control Module
  • MOOG QAIO2/2-AV D137-001-011 Analog Input/Output Module
  • MOOG D136-002-002 Servo Drive or Control Module
  • MOOG D136-002-005 Servo Drive Control Module
  • MOOG D136E001-001 Servo Control Card Module
  • MOOG M128-010-A001B Servo Control Module Variant
  • MOOG G123-825-001 Servo Control Module
  • MOOG D136-001-008a Servo Control Card Module
  • MOOG M128-010 Servo Control Module
  • MOOG T161-902A-00-B4-2-2A Servo-Proportional Control Module
  • MOTOROLA 21255-1 Electronic Component Module
  • MOTOROLA 12967-1 / 13000C Component Assembly
  • MOTOROLA 01-W3914B Industrial Control Module
  • Motorola MVME2604-4351 PowerPC VMEbus Single Board Computer
  • MOTOROLA MVME162-513A VMEbus Embedded Computer Board
  • MOTOROLA MPC2004 Embedded PowerPC Processor
  • Motorola MVME6100 VMEbus Single Board Computer
  • MOTOROLA MVME162PA-344E VMEbus Embedded Computer Board
  • MOTOROLA RSG2PMC RSG2PMCF-NK2 PMC Expansion Module
  • Motorola APM-420A Analog Power Monitoring Module
  • MOTOROLA 0188679 0190530 Component Pair
  • Motorola 188987-008R 188987-008R001 Power Control Module
  • MOTOROLA DB1-1 DB1-FALCON Control Interface Module
  • MOTOROLA AET-3047 Antenna Module
  • Motorola MVME2604761 PowerPC VMEbus Single Board Computer
  • MOTOROLA MVME761-001 VMEbus Single Board Computer
  • MOTOROLA 84-W8865B01B Electronic System Module
  • Motorola MVIP301 Digital Telephony Interface Module
  • MOTOROLA 84-W8973B01A Industrial Control Module
  • MOTOROLA MVME2431 VMEbus Embedded Computer Board
  • MOTOROLA MVME172PA-652SE VMEbus Single Board Computer
  • Motorola MVME162-223 VMEbus Single Board Computer
  • MOTOROLA BOARD 466023 Electronic Circuit Board
  • Motorola MVME333-2 6-Channel Serial Communication Controller
  • MOTOROLA 01-W3324F Industrial Control Module
  • MOTOROLA MVME335 VMEbus Embedded Computer Board
  • Motorola MVME147SRF VMEbus Single Board Computer
  • MOTOROLA MVME705B VMEbus Single Board Computer
  • MOTOROLA MVME712A/AM VMEbus Embedded Computer Board
  • MOTOROLA MVME715P VMEbus Single Board Computer
  • Motorola MVME172-533 VMEbus Single Board Computer
  • Motorola TMCP700 W33378F Control Processor Module
  • MOTOROLA MVME188A VMEbus Embedded Computer Board
  • Motorola MVME712/M VME Transition Module
  • Motorola 30-W2960B01A Industrial Processor Control Module
  • MOTOROLA FAB 0340-1049 Electronic Module
  • Motorola MVME162-210 VME Single Board Computer
  • Motorola MVME300 VMEbus GPIB IEEE-488 Interface Controller
  • MOTOROLA CPCI-6020TM CompactPCI Processor Board
  • Motorola MVME162-522A VMEbus Single Board Computer
  • MOTOROLA MVME162-512A VMEbus Single Board Computer
  • MOTOROLA MVME162-522A 01-W3960B/61C VMEbus Single Board Computer
  • MOTOROLA MVME162-220 VMEbus Embedded Computer Board
  • Motorola MVME162-13 VMEbus Single Board Computer
  • MOTOROLA MVME162-10 VMEbus Single Board Computer
  • RELIANCE 57C330C AutoMax Network Interface Module
  • RELIANCE 6MDBN-012102 Drive System Module
  • RELIANCE 0-60067-1 Industrial Drive Control Module
  • Reliance Electric 0-60067-A AutoMax Communication Module
  • RELIANCE S0-60065 System Control Module
  • RELIANCE S-D4006-F Industrial Drive Control Module
  • Reliance Electric S-D4011-E Shark I/O Analog Input Module
  • RELIANCE S-D4009-D Drive Control Module
  • RELIANCE S-D4043 Drive Control Module
  • Reliance DSA-MTR60D Digital Servo Motor Interface Module
  • RELIANCE 0-60063-2 Industrial Drive Control Module
  • RELIANCE S-D4041 Industrial Control Module
  • Reliance Electric SR3000 2SR40700 Power Module
  • RELIANCE VZ7000 UVZ701E Variable Frequency Drive Module
  • RELIANCE VZ3000G UVZC3455G Drive System Module
  • Reliance Electric S-D4039 Remote I/O Head Module
  • RELIANCE 0-57210-31 Industrial Drive Control Module
  • RELIANCE 0-56942-1-CA Control System Module
  • Reliance Electric 0-57100 AutoMax Power Supply Module
  • RELIANCE 0-54341-21 Industrial Control Module
  • RELIANCE 0-52712 800756-21B Drive Interface Board
  • KEBA PS242 - Power Supply Module
  • KEBA BL460A - Bus Coupling Module
  • KEBA K2-400 OF457/A Operating Panel
  • KEBA T200-M0A-Z20S7 Panel PC
  • KEBA K2-700 AMT9535 Touch Screen Panel
  • KEBA T20e-r00-Am0-C Handheld Terminal
  • KEBA OP350-LD/J-600 Operating Panel
  • KEBA 3HAC028357-001 DSQC 679 IRC5 Teach Pendant
  • KEBA E-32-KIGIN Digital Input Card
  • KEBA FP005 Front Panel
  • KEBA BT081 2064A-0 Module
  • KEBA FP-005-LC / FP-004-LC Front Panel
  • KEBA SI232 Serial Interface
  • KEBA T70-M00-AA0-LE KeTop Teach Pendant
  • KEBA KEMRO-BUS-8 Bus Module
  • KEBA IT-10095 Interface Terminal
  • KEBA RFG-150AWT Power Supply Unit
  • KEBA C55-200-BU0-W Control Unit
  • KEBA Tt100-MV1 Temperature Module
  • KEBA E-HSI-RS232 D1714C / D1714B Interface Module
  • KEBA E-HSI-CL D1713D Interface Module
  • KEBA D1321F-1 Input Module
  • KEBA E-32-D Digital Input Card
  • KEBA C5 DM570 Digital Module
  • KEBA XE020 71088 Module
  • KEBA E-16-DIGOUT Digital Output Card