ADLINK MVP-6200 Industrial Control Computer: PCIe Gen4 and PCI Hybrid Expansion

ADLINK MVP-6200 series fanless embedded industrial computer: perfect balance between PCIe Gen4 high-speed expansion and PCI traditional compatibility

In the wave of industrial automation upgrades, system integrators often face a dilemma: the new generation of image acquisition cards and AI acceleration cards require high bandwidth PCIe Gen4, while a large number of old motion control cards and I/O boards on production lines still adhere to PCI interfaces. Whether these two extensions can be supported simultaneously on the same platform determines the smoothness and cost of the production line transformation. The MVP-6200 series launched by ADLINK is a value based fanless embedded computer designed to solve this contradiction. It is equipped with the 12th generation Intel ®  Core ™ Processor (Alder Lake), R680E chipset, DDR5 memory, and offer 2 or 4 slot backplane options, with the 4 slot version including 1 x PCIe Gen4 x16, 2 x PCIe Gen3 x4, and 1 x traditional PCI slot. It also supports four independent 4K displays and three 2.5GbE TSN networks. This article will provide engineers with a detailed technical reference from the dimensions of model configuration, hardware architecture, expansion backplane, installation process, BIOS tuning, and development resources.

Product series and model matrix

The MVP-6200 series is divided into multiple sub models based on processor performance, power consumption, and backplane slot positions, with clear naming conventions:

MVP-6249/6247: Equipped with i9-12900E (16 cores, 65W) or i7-12700E (12 cores, 65W), 4-slot backplane (PCIe Gen4 x16+2 x PCIe Gen3 x4+PCI)

MVP-6247T/6245T: Equipped with i7-12700TE (12 cores, 35W) or i5-12500TE (6 cores, 35W), 4-slot backplane

MVP-6229/6227: i9-12900E or i7-12700E, 2-slot backplane (PCIe Gen4 x16+PCI)

MVP-6227T/6225T: i7-12700TE or i5-12500TE, 2-slot backplate

The "62" series has 2 slots, while the "64" series has 4 slots. All models use Intel ®  R680E chipset, supports vPro/AMT (specific models), 4 x DDR5 SO-DIMM slots, maximum 128GB 3600MHz memory. The height of the two slot model is 165mm, and the height of the four slot model is 206mm. The width and depth are both 210mm × 240mm, with weights of 5.01kg and 5.4kg, respectively.

External I/O interfaces: quad display, tri network, multi serial port

MVP-6200 arranges all external interfaces on the front and right sides (see Figure 3-1/3-2), with a single-sided maintenance design that facilitates on-site wiring.

1. Display output

Provide 2 x DisplayPort++and 2 x HDMI, support four independent displays, maximum resolution:

DP1/DP2：4096× 2304@60Hz

HDMI1/HDMI2：3840× 2160@60Hz

The four display capabilities make it highly suitable for multi workstation HMI, digital signage, and monitoring center applications.

2. Network communication

Onboard 3 x Intel I225-LM 2.5GbE ports, supporting TSN (Time Sensitive Network), including IEEE 802.1AS precise time synchronization and 802.1Qav traffic shaping. The three network ports can be configured as redundant links or load balancing, and support WOL and PXE.

3. USB and serial port

4 x USB 3.2 Gen 2 (10Gbps)+2 x USB 3.2 Gen 1 (5Gbps), front panel provides high current output (USB1/2 independent 1.6A, shared with others).

4 x COM port (DB9): COM1/2 supports RS-232/422/485 software switching (BIOS settings), COM3/4 is fixed to RS-232. There are also COM5/6 reserved for needle arrangement, for customized expansion.

4. Digital I/O and Audio

8 × DI+8 × DO (non isolated): Input high level 2~5.25V, low level 0~0.8V; output open drain MOSFET, built-in 200 Ω pull-up, single channel 24mA driver.

Audio: Line in and Line out (TEMPO 92HD91 chip).

5. Antenna and power supply

6 x SMA antenna ports: ANT1-4 for 5G, ANT5-6 for WiFi 2.4/5GHz.

DC input: Supports 9V~32V ultra wide voltage, suitable for various power supply environments in vehicles, energy storage, and industrial sites.

Core highlight: Backplane design for PCIe Gen4 and PCI coexistence

The MVP-6200 series offers two backplane options to meet different expansion needs:

2-slot backplate (MVP-622x)

1 x PCIe Gen4 x16 slot: directly connected to CPU, providing up to 16 GT/s bandwidth, suitable for high-performance GPU, AI acceleration card or high-speed image acquisition card.

1 x PCI slot: Based on ITE IT8892E PCIe to PCI bridge, connected to the host through PCIe x1 Gen3 interface, supporting universal or 5V 32-bit PCI card (33MHz). This allows a large number of legacy PCI motion control cards, data acquisition cards, and serial port cards to continue serving without the need for replacement.

4-channel backplate (MVP-624x)

1 x PCIe Gen4 x16 (main slot)

2 x PCIe Gen3 x4 (open slot, compatible with x16 physical cards)

1 x PCI slot (same as the same bridge)

All PCIe slots support Gen3/Gen4 auto negotiation, and the backplane provides an independent 12V Extra Power connector to ensure stable operation of high-power expansion cards. The backplane also integrates SATA power/data connectors, USB 2.0 dongle interfaces, and fan connectors for easy expansion card heat dissipation.

Board installation space

The manual provides a detailed PCIe/PCI card gap diagram (Section 4.5), indicating the limitations on the length of expansion cards when using SSDs of different thicknesses (9.5mm or 15mm). Engineers need to pay special attention to mechanical interference when selecting long cards.