ABB INNPM22 Network Processor Module

ABB INNPM22 Network Processor Module

Basic product information

Core identification

Product ID: INNPM22

ABB model name: INNPM22

Product catalog description: INNPM22, Network Processor Module, suitable for Infinet systems

Product type: Communication-Module

Procurement and Customs Information

HS code: 851762 (classification description: telephone, including telephone for cellular or other wireless networks; other devices used for transmitting or receiving voice, image or other data, including wired or wireless network (such as local area network or wide area network) communication devices, but excluding transmission or reception devices of heading 84.43, 85.25, 85.27 or 85.28; Among them, machines used for receiving, converting, transmitting or reproducing voice, image or other data, including switching and routing devices, belong to the category of "other devices used for transmitting or receiving voice, image or other data, including wired or wireless network communication devices"

Customs Tariff Number: 85176200

Physical specifications

Specific numerical values for specification items

Product net depth/length 73.66 millimeters

Product net height 360.68 millimeters

Product net width 279.4 millimeters

Net weight of product 0 kg

Environmental and battery related information

WEEE classification: 5 categories (small equipment, no external dimensions exceeding 50 centimeters)

battery parameters

Number of batteries: 1

Chemical composition of battery: Lithium

Battery type: Button Cell

Battery weight: 5 grams

Product classification attribution

The overall classification path is: Control Systems → Symphony Plus series → Controllers → HR series (Harmony Rack) hardware → SPNPM22

Precautions

Safety specifications are generally applicable to control system handling. Instructions and warnings related to a specific subject or operation of the product.

The following norms must be strictly observed:

  must strictly comply with the technical specifications and typical applications of the product system

  Personnel training: Only trained personnel shall install, operate, maintain or repair the product system. must

Provide guidance and explanation of the situation in danger areas to these personnel.

  Unauthorized changes: Changes or structural changes to the product system may not be made.

  Maintenance responsibility: Must ensure that the product system is used only under appropriate conditions and in full fitness for use.

 Working environment: The user must meet the specified environmental conditions:

Safety regulation

The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Verify that the installation is complete.

4 Ground and short-circuit the device.

Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must

Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.