Recycling requirements: After the product is scrapped, it must be classified and recycled according to local electronic waste regulations, and it is prohibited to dispose of it at will (including harmful substances, which need to be professionally handled).

Summary of Core Technical Parameters
(1) Physical and mechanical parameters
Module series dimensions (width x height x depth) Protection level Vibration resistance (IEC 60068-2-6) Impact resistance (IEC 60068-2-27)
MM2 series 38mm × 110mm × 79mm IP20 2Hz~13.2Hz (1mm amplitude); 8.4Hz~150Hz(1g) 15g,11ms
MM3/MM4 series 38mm × 110mm × 119mm IP20 5Hz~8.4Hz (3.5mm amplitude); 8.4Hz~150Hz(1g) 15g,11ms
MB20 expansion module compatible with basic module size IP20, same as basic module
Open variant series 38mm × 110mm × 79/119mm IP20 adapted to application scenarios 15g, 11ms
(2) Environmental parameters
Parameter standard type (S-level) extended type (T/E level)
Working temperature: 0 ℃~+60 ℃ -40 ℃~+70 ℃
Storage temperature -40 ℃~+70 ℃ -40 ℃~+85 ℃
Relative humidity 10%~95% (no condensation) 10%~95% (no condensation)
Maximum altitude 2000m (795hPa) 2000m (795hPa, customizable for higher altitudes)
Pollution Level 2 (IEC 60664-1) 2 (IEC 60664-1)
(3) Transmission performance parameters
1. Wired Port (TP)
Speed cable type maximum transmission distance interface standard
10BASE-T Cat3 and above 100m IEEE 802.3
100BASE-TX Cat5 and above 100m IEEE 802.3u
1000BASE-T Cat5e and above 100m IEEE 802.3ab
Features support Autocrossing, Autonegotiation, and Autopolarity
2. Optical fiber port (LWL)
Rate, optical fiber type, wavelength, maximum transmission distance, system attenuation
10BASE-FL (multimode) 62.5/125 µ m MM 850nm 2km 0-12.5dB
100BASE-FX (multimode) 50/125 µ m MM 850nm 5km 0-8dB
100BASE-FX (Single Mode) 9/125 µ m SM 1300nm 30km 0-16dB
1000BASE-SX (multimode) 50/125 µ m MM 850nm 550m 0-7.5dB
1000BASE-LX (Single Mode) 9/125 µ m SM 1310nm 20km 0-11dB
1000BASE-LH (Single Mode) 9/125 µ m SM 1550nm 120km 15-32dB
(4) Power consumption
Unit conversion of module type power consumption range (Btu/h)
TP media module (such as MM2-4TX1) 0.8W 2.8
Multimode LWL dielectric module (such as MM2-4FXM3) 6.8W 23.2
Gigabit media module (such as MM4-4TX/SFP) 9.0W 30.8
PoE module (MM22-T1T1T1T1) 0.8W (excluding terminal power supply) 2.8
Digital I/O module (MM24) 7.5W-
SFP module 0W (dependent on basic module power supply) 0
MB20 expansion module 0W 0
Product code and ordering information
(1) Open variant series product coding rules
The product code consists of "product prefix+port configuration+temperature level+authorization code", and the meanings of each field are as follows:
Product prefix (1-4 digits): MM20 (10/100M standard) MM21(10/100M PTPv2)、MM22(10/100M PoE)、MM23(10/100M PTPv2)、MM24( Digital I/O, MM30 (1000M standard) MM33(1000M PTPv2);
Port configuration (bits 5-13): The 5th bit is the delimiter "-", bits 6-7 are the type of port 1 (such as T1=RJ45, M2=multimode DSC, O7=Combo SFP), bits 8-9 are the type of port 2, bits 10-11 are the type of port 3, and bits 12-13 are the type of port 4 (99=empty port);
Temperature rating (14 digits): S (standard: 0 ℃~+60 ℃), T (extension: -40 ℃~+70 ℃), E (extension+anti condensation coating: -40 ℃~+70 ℃);
Authorization code (15 digits): A (CE+UL 508+ISA 12.12.01), B (including ATEX+classification society), E (including railway certification), H/S (including substation certification), Y (CE+UL 508), Z (CE only).
Example: The module corresponding to the code MM30-07070707SA is a "1000M standard media module, 4 Combo SFP ports, standard temperature rating, CE+UL 508+ISA 12.12.01 certification", equivalent to MM4-4TX/SFP (order number 943010-001).
(2) Core module order number
Module type represents model and order number
Basic module MS2108-2- (ordered separately, needs to be paired with media module)
Media module MM2-4TX1 943 722-101
MM3-2AUI 943 840-101
MM4-4TX/SFP 943 010-001
Expansion module MB20 943 733-102
SFP module M-SFP-LX/LC 943 015-001
PoE power supply RPS60/48V EEC 943 952-001

Email:wang@kongjiangauto.com