Bently 3500/42M Proximitor Seismic Monitor

Bently 3500/42M Proximitor Seismic Monitor

OVERVIEW

The 3500/42M Proximitor Seismic Monitor: 

l Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. 

l Communicates essential machine information to both operations and maintenance personnel.

The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic transducers. It conditions the signal to provide vibration and position measurements and compares the conditioned signals with user-programmable alarms.

Specifications Inputs

Signal：Accepts from 1 to 4 proximity, velocity or acceleration transducer signals

Power consumption：7.7 watts, typical

Standard I/O：10 kΩ (Proximitor and acceleration inputs)

Front Panel LEDs

OK LED：Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly.

TX/RX LED：Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack.

Bypass LED：Indicates when the 3500/42M Proximitor Seismic Monitor is in Bypass Mode.

Output Impedance：550 Ω

Transducer Power Supply：-24 Vdc

Direct filter：-3 dB at 15.6 Hz

Gap filter：-3 dB at 0.41 Hz

Frequency Response

Bias：-3dB at 0.01 Hz Velocity II only

Not OK filter ：-3 dB at 40 Hz Velocity II only

Peak or peakto-p

Compliance and Certifications

FCC 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

l This device may not cause harmful interference. 

l This device must accept any interference received, including interference that may cause undesired operation.

More relevant models

BENTLY 2300/25 Vibration Monitors

bently 2300/20 Vibration Monitors

BENTLY 1900/27 Vibration Monitor

BENTLY 3500-33 16-Channel Relay Module

bently 106M1081-01 Power Input Module