GE Fanuc IC200UEX624 Versamax PLC

 IC200UEX624  Versamax PLC

Product Type:Remote I/O Network Interface:Profinet Power Consumption:0.60 Amperes at 5 Volts DC Ports:2 Dimensions:11 x 6 x 6.7 cm Weight:0.14 kg Input Voltage Range:0 to 60 VDC Number of Points:16 Series:Versamax Product ID:IC200UEX624 Type Designation:Remote I/O Module The GE Fanuc IC200UEX624 Versamax PLC is engineered for seamless integration into complex industrial environments, offering unparalleled performance and reliability. Designed with cutting-edge technology, this remote I/O module ensures efficient data transmission over Profinet networks, making it an ideal choice for modern factory floors. 

 Featuring robust power consumption management, the IC200UEX624 draws only 0.60 Amperes at 5 Volts DC, minimizing energy use without compromising on operational efficiency. Its compact design, measuring just 11 x 6 x 6.7 cm, allows for easy installation in tight spaces, enhancing the overall system layout. With support for up to 16 input points, this module caters to diverse application requirements, enabling precise control and monitoring in various industrial processes. Its wide voltage range from 0 to 60 VDC ensures compatibility with a broad spectrum of industrial equipment. Built with high-quality materials and advanced engineering, the IC200UEX624 Versamax PLC boasts exceptional durability and reliability. Its lightweight design (0.14 kg) facilitates quick and effortless handling during installation and maintenance operations, optimizing productivity. 

 Designed with user convenience in mind, this remote I/O module comes equipped with intuitive interfaces and comprehensive documentation, allowing for straightforward setup and configuration. It seamlessly integrates with existing systems through its Profinet network interface, enhancing system scalability and flexibility. Engineered for industrial automation, the GE Fanuc IC200UEX624  Versamax PLC delivers precise control and reliable operation in manufacturing environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module