GE Fanuc IS200EPDMG1A Advanced Power Distribution Module for Industry 4.0 Applications

 IS200EPDMG1A Advanced Power Distribution Module for Industry 4.0 Applications

Board Type:Power Supply Board DC Source Supply:P125V and N125V Function:Power Supply for Protection, I/O, and Control Boards Location:Mounted on the side of the EPBP Nominal Voltages to the Ground:+62.5 V and -62.5 V Power Supply:Station Battery 125 VDC The GE Fanuc IS200EPDMG1A is a specialized power distribution module tailored for the robust and reliable operation of exciter systems in industrial control environments. It is meticulously designed to ensure high efficiency and compatibility with the EX2100 series. Key to its functionality is its ability to supply critical power through its P125V and N125V DC source supply, ensuring seamless operation across various applications. 

This feature is complemented by its modular design, allowing for easy integration and maintenance. Positioned on the side of the EPBP, the IS200EPDMG1A offers nominal voltages to the ground of +62.5 V and -62.5 V, providing a stable and safe power environment for connected devices. Its power supply is sourced from a station battery at 125 VDC, ensuring reliability even under varying operational conditions. Crafted with precision, the IS200EPDMG1A boasts a sleek and durable construction that withstands the rigors of industrial settings. It is made using high-grade materials that guarantee longevity and performance, making it a preferred choice among engineers and technicians worldwide. 

 With its advanced capabilities, the IS200EPDMG1A simplifies complex power management tasks, enhancing system stability and productivity. Whether you e upgrading existing systems or integrating into new setups, this power distribution module is a reliable solution for maintaining optimal performance. The GE FANUC IS200EPDMG1A Power Distribution Module is a high-performance component designed for efficient power management in industrial control systems, ensuring reliable operation and optimal energy utilization. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module