GE Fanuc IC697CHS790K | 90-70 Series Process Control Module

GE Fanuc IC697CHS790K | 90-70 Series Process Control Module

Processing Speed:Up to 32 MHz RAM Capacity:1 MB Flash Memory:Up to 2 MB Operating System:GE  Proficy Software Suite Communication Interfaces:Ethernet, RS-485, DeviceNet Input/Output Channels:Variable, depending on configuration Power Consumption:15 W (typical) Operating Temperature Range:-20"C to +60"C Environmental Standards:ISO 9001 certified quality management system Safety Certification:CE compliant The GE-FANUC IC697CHS790K processor module is engineered to provide exceptional performance and reliability in demanding industrial environments. 

Its robust design allows for seamless integration into a wide range of automation systems, enhancing operational efficiency and productivity. Equipped with advanced software suite from GE  Proficy, this module supports comprehensive control applications, including batch processing, quality control, and data analysis, ensuring real-time monitoring and optimization of industrial processes. Featuring multiple communication interfaces such as Ethernet, RS-485, and DeviceNet, the IC697CHS790K facilitates efficient data exchange with other devices, enabling seamless connectivity across the factory floor. This feature is crucial for implementing modern, interconnected manufacturing systems. 

 With its high-speed processing capability, ample memory capacity, and extensive input/output channels, the IC697CHS790K ensures rapid execution of complex control algorithms and supports a broad spectrum of I/O configurations to meet diverse application requirements. The processor module is designed to operate within a wide temperature range, ensuring reliable performance in various industrial settings. It complies with international safety standards, including CE certification, ensuring it meets stringent safety requirements and can be deployed with confidence in global markets. The GE Fanuc IC697CHS790K is an advanced control module designed for industrial automation applications, offering high performance, reliability, and adaptability.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module