GE-FANUC IC693PBM200-FE Master Module

GE-FANUC IC693PBM200-FE Master Module

Model Number:IC693PBM200-FE Type:Master Module Series:IC693 Operating Voltage:24 VDC Communication Protocol:ControlNet Power Consumption:Max. 3.5 W Dimensions:41mm x 89mm x 48mm Weight:0.14kg Operating Temperature Range:-40"C to +70"C Humidity Range:5% to 95% RH non-condensing Compatibility:Compatible with GE Mark VI Control Systems Integrating cutting-edge technology, the General Electric IC693PBM200-FE Master Module stands as a cornerstone in the realm of industrial automation. Designed for efficiency and reliability, it ensures smooth communication and control within intricate manufacturing environments. With its robust power supply and wide operating temperature range (-20"C to +70"C), this module can withstand the harshest industrial conditions without compromising performance.

 Its compatibility with RS-485 communication interface facilitates seamless data exchange between various components of the system. Featuring a data transfer rate of 9600 bps, the module ensures rapid and accurate transmission of control signals, crucial for the precise operation of machinery. Its compact yet sturdy design, coupled with a terminal block connection type, allows for easy installation and maintenance. Manufactured with premium materials, the General Electric IC693PBM200-FE Master Module is built to last, offering unparalleled durability and reliability in high-demand industrial settings. It is a testament to General Electric  commitment to providing state-of-the-art solutions for industrial automation. 

 Whether you e enhancing existing systems or setting up new facilities, the General Electric IC693PBM200-FE Master Module is your trusted partner in achieving optimal performance and efficiency in your manufacturing operations. The General Electric IC693PBM200-FE Master Module is a high-performance, versatile master module designed for advanced industrial automation control systems, offering seamless integration and efficient operation in demanding environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module