LTi Drives CDE34.008.W2.4 Servo Drive
Product Overview
The LTi Drives CDE34.008.W2.4 is an industrial servo drive identified by its CDE34 family designation and W2.4 configuration. The supplied product information lists three phase output from zero to 400 V, a current value of 7.8 A and an apparent power rating of 5.4 kVA. These values should be checked against the original nameplate and applicable technical documentation before the unit is installed or selected for a replacement application.
A servo drive controls electrical power delivered to a compatible motor. It processes command references and manages motor operation according to its supported control functions and configured parameters. The overall motion performance depends on the controller, motor, feedback equipment and mechanical load working together.
Electrical Characteristics
The stated three phase output range from zero to 400 V is an important selection parameter. The permitted output conditions and corresponding motor compatibility must be verified from the drive documentation. The listed 7.8 A value should be checked to establish the applicable continuous or other current rating.
The 5.4 kVA apparent power value provides another reference for system assessment. Apparent power is not identical to real power in kW, so it should not be used as a direct motor power rating without the relevant electrical specifications.
Motor Compatibility and Control
Before connecting a motor, verify the motor's rated voltage, current, speed, torque and feedback arrangement. Confirm that the drive supports the motor type and the intended operating mode. Configuration parameters must match the connected equipment and the requirements of the machine.
The complete CDE34.008.W2.4 designation should be preserved in equipment records. The alternative identifier CDE34008W24 should be checked against the physical label before it is used to establish interchangeability with another unit.
Industrial Applications
Servo drives are used in industrial automation where controlled motor movement is required. Depending on the verified configuration, suitable applications may include production machinery, assembly equipment, material handling and positioning systems.
Drive selection should account for the required torque, speed range, acceleration, load inertia, operating cycle and ambient conditions. The controller should be evaluated within the complete motion system rather than by current or voltage alone.
Installation and Commissioning
Installation must follow the applicable technical instructions. Qualified personnel should isolate the power supply before connecting electrical wiring. Check grounding, motor terminals, control connections, feedback wiring and cooling arrangements before energizing the unit.
During commissioning, verify the motor parameters, operating mode, command source and protective limits. Test rotation direction and command response under controlled conditions, and validate the machine's protective functions before normal operation.
Diagnostics and Maintenance
Inspect terminals, cables, cooling paths and mounting points regularly. When a fault occurs, review diagnostic information and check the electrical supply, motor wiring, feedback signals and configuration parameters before replacing the drive.
The LTi Drives CDE34.008.W2.4 should be selected using its complete model designation and verified electrical ratings. Correct motor matching and commissioning help support stable operation and dependable industrial motion control.
