LUST LTi Drives SO84.008.1020.0070.1 ServoOne Drive
Product Overview
The LUST LTi Drives SO84.008.1020.0070.1 is an industrial ServoOne drive controller identified by its complete model designation. The supplied product information lists a DC voltage value of 560 V, an apparent power rating of 5.9 kVA, a current value of 8.0 A and a Profibus interface reference.
These details should be verified against the product nameplate and applicable technical documentation before installation. The precise meaning of each electrical rating and the available Profibus functionality depend on the documented configuration of the unit.
ServoOne Drive Function
A servo drive regulates electrical power supplied to a compatible motor and responds to command signals from the machine control system. Depending on the supported control modes and connected feedback equipment, the complete system may provide controlled motor movement and coordinated machine operation.
Correct operation depends on selecting compatible electrical components and configuring the drive for the connected motor. Motor data, feedback settings, command references and protective limits must be verified before the drive is enabled.
Electrical Specifications
The supplied 560 V DC value is an important electrical identification detail. It must be interpreted according to the manufacturer's specification and must not be treated as sufficient information to determine the entire supply arrangement or safe connection procedure.
The listed 5.9 kVA apparent power and 8.0 A current values should also be confirmed in the technical documentation. Apparent power and real power are different quantities, and current ratings may refer to different operating conditions. Proper drive selection requires the rated input and output data, overload capability and protective device requirements.
Profibus Integration
Profibus is an industrial communication technology used to exchange data between compatible automation devices. Where the installed drive configuration supports Profibus, the communication interface can form part of the control architecture linking the drive to a machine controller.
Before integration, confirm the supported Profibus variant, hardware configuration, connector arrangement and required parameter settings. Network addressing, communication settings and controller configuration must match the installed automation system. The presence of a Profibus reference in a product description should not replace verification of the actual interface fitted to the unit.
Industrial Applications
Servo drives are used in industrial machinery requiring controlled motor operation and coordinated movement. Potential application categories include manufacturing equipment, positioning systems and automated handling machinery. Suitability depends on the required torque, speed range, duty cycle and electrical operating conditions.
Installation and Commissioning
Installation should be performed by qualified personnel following the applicable ServoOne instructions. Isolate the power supply and follow the prescribed DC link discharge procedure before working on electrical connections. Verify grounding, power wiring, motor connections, feedback signals and communication cabling.
During commissioning, check the motor parameters, control mode, communication configuration and protective settings. Confirm that the drive communicates correctly with the control system and responds safely to commands.
Diagnostics and Maintenance
Inspect connectors, terminals, cooling paths and wiring for signs of damage or overheating. If a fault occurs, review the drive diagnostics, electrical supply, feedback signals and Profibus communication status.
When replacing the unit, confirm the full SO84.008.1020.0070.1 designation, verified electrical ratings and communication compatibility. Accurate identification supports dependable integration into industrial motion control systems.
