Chemical safeguard measure

(1) Strict project construction requirements

New modern coal chemical projects must comply with the overall land use plan, and the requirements of the total energy consumption and intensity control indicators in the region where they are located, and meet the standards and specifications of urban planning, land use, safety and environmental protection, energy saving and water saving. The site selection and pollution control measures of the project should meet the relevant requirements of the "Environmental Access Conditions for Modern Coal Chemical Industry Construction Projects (Trial)", strictly control the emission of sulfur dioxide, nitrogen oxides, fine particles, volatile organic compounds and other toxic and harmful atmospheric pollutants, and achieve harmless treatment and resource utilization of solid waste and high-salt wastewater. The annual production capacity of a single series of olefin making devices is 500,000 tons and above, the overall energy efficiency is higher than 44%, the comprehensive energy consumption per unit of olefin products is lower than 2.8 tons of standard coal (calculated according to the "energy consumption quota of coal to olefin Unit product" (GB30180) method), and the consumption of fresh water is less than 16 tons. The annual production capacity of the coal-to-ethylene glycol device is 200,000 tons or more, and the comprehensive energy consumption per unit of ethylene glycol product is lower than 2.4 tons of standard coal and the consumption of fresh water is less than 10 tons. The construction requirements of coal-to-fuel projects such as coal-to-oil and coal-to-gas are implemented in accordance with the 13th Five-Year Plan for the demonstration of coal deep Processing Industry.

The modern coal chemical industry demonstration zone is preferentially adjacent to the integrated construction of large coal bases, fully considering the water function zoning and the total amount of pollutants limited, and is distributed in areas with strong water resource access capacity, good ecological environmental capacity, large carbon dioxide emission reduction potential, and far away from the ecological red line control area and centralized residential areas. The amount of coal base resources should ensure the needs of economic operation cycle of coal chemical industry demonstration zone. Public works and auxiliary facilities such as heating, sewage treatment facilities, solid waste treatment and recycling facilities, safety and environmental risk prevention and control facilities in demonstration areas should be built in a coordinated manner, and the carbon dioxide conversion plan and utilization level should be adapted to the industrialization progress of relevant technologies. Demonstration zones shall conform to urban and rural planning, and shall formulate overall development plans and special plans for safety, environmental protection and fire protection, and carry out environmental impact assessment and water resources demonstration for the overall development planning of demonstration zones in accordance with the law.

The modern coal chemical industry demonstration zone should carry out the construction of smart parks, and adopt information technologies such as cloud computing, big data, Internet of Things, and geographic information system to improve the application level of information technology. Relying on public service platforms such as online trading, modern logistics, inspection and testing, the park will improve its security management, environmental protection, energy management, emergency rescue and public service capabilities. Modern coal chemical enterprises should carry out intelligent manufacturing demonstration, so that the production and operation of enterprises have comprehensive self-perception, self-analysis, self-decision-making and self-execution capabilities, and improve the safety and environmental protection level of enterprises by information and intelligent means.

2. Standardizing procedures for examination and approval

New coal-to olefin and coal-to aromatics projects must be included in the "Modern Coal Chemical Industry Innovation and Development Layout Plan" and must meet the requirements of the "Modern Coal chemical Industry Construction Project Environmental Access Conditions (Trial)". Owners of coal chemical projects can independently carry out the preliminary work, and relevant departments can carry out urban planning, land pre-examination, environmental impact assessment, water resources demonstration and other work according to law. In accordance with the spirit of The State Council on streamlining administration and delegating power and the requirements of the Catalogue of Investment Projects approved by the Government (2016), the new coal-to-olefins and coal-to-aromatics projects (excluding coal-to-fuel projects such as coal-to-oil and coal-to-gas) that will be included in the "Modern coal chemical Industry Innovation and Development Layout Plan" will be devolved to the provincial government for approval.

3. Promoting rational allocation of resources