ADLINK NuPRO-E47: PICMG 1.3 13th Generation Core Industrial SHB

Larger capacity: The maximum capacity of a single DDR5 DIMM can reach 32GB (currently), and two can achieve 64GB.

Lower power consumption: The operating voltage of DDR5 is reduced to 1.1V (DDR4 is 1.2V).

Built in power management: DDR5 integrates a power management IC (PMIC) into the memory module, providing more stable and precise power supply.

This is crucial for industrial applications that require processing large-scale image data, running virtual machines, or performing AI inference - larger memory bandwidth means that CPUs can access data faster, reduce waiting cycles, and significantly improve overall system throughput.

3. M.2 storage expansion

The NuPRO-E47 has added an M.2 M-Key slot (size 2280) that supports PCIe Gen4 x4 interfaces, with a theoretical bandwidth of up to 8GB/s. This feature allows direct installation of the current highest performance NVMe SSD, achieving over 10 times faster sequential read and write speeds compared to traditional SATA 3.0 (6Gbps). For applications that require high-speed data recording, fast startup of operating systems, and loading of large AI models, M.2 NVMe SSD has become an indispensable storage solution.

4. Comprehensive configuration of industrial grade I/O interfaces

Six SATA 3.0+RAID: Provides six SATA 3.0 interfaces (6Gbps) and supports RAID 0/1/5/10. The six SATA ports provide ample storage expansion capability for applications that require large-scale local storage, such as NVR video surveillance systems and edge database servers.

Four serial ports: Provides four COM ports, which are led out through the onboard 2.0mm pin header

Two are RS-232 standard ports.

Two configurable ports for RS-232/422/485, supporting automatic flow control for easy connection to industrial field equipment.

USB interface:

Three USB 3.2 Gen2 x1 (10Gbps) are located on the rear I/O panel.

6 USB 3.2 Gen1 x1 (5Gbps) are led out through the onboard pin bank.

1 USB 3.2 Gen1 x1 vertical Type-A port (onboard).

4 USB 2.0 ports are connected to the backplane.

There are a total of 14 USB ports (10 of which are USB 3.2), providing sufficient interface resources for connecting high-resolution industrial cameras and multi-channel data acquisition devices.

Display output:

1 x HDMI (rear I/O), with a maximum resolution of 4096 x 2160@60Hz Supports 4K ultra high definition display.

1 x DVI-D (drawn out through onboard pin arrangement), with a maximum resolution of 1920 x 1200@60Hz .

1 x VGA (via onboard pin), with a maximum resolution of 1920 x 1200@60Hz .

The triple display output capability (HDMI+DVI-D+VGA) makes it an ideal choice for multi screen HMI applications such as control center monitoring walls and production line operation stations.

Network interface: Two Intel chips onboard ®  2.5GbE Ethernet Controller:

LAN1：Intel ®  I225-V。

LAN2：Intel ®  I225-LM (supports AMT remote management).

Compared to traditional gigabit Ethernet ports, 2.5GbE (2500Mbps) provides a 2.5-fold increase in bandwidth, which can meet the needs of high-resolution image data transmission and high-speed network storage access. The dual port design supports both network redundancy (such as link aggregation) and physical isolation between the management network and the data network.

DIO interface: Added 1 8-bit input+8-bit output digital I/O interface (via onboard pin header), which can directly connect industrial sensors, alarms, indicator lights and other digital signal devices without the need for additional expansion cards.

Audio interface: Supports DB-Audio2 audio daughter cards through onboard pin placement, based on Realtek ®  ALC262 Codec， Support Intel ® High fidelity audio (HDA).

LPT parallel port: It supports traditional industrial printers and parallel devices through onboard pin headers.

TPM module: Supports Infineon TPM SLB 9670XQ2.0 or 9670VQ2.0 hardware security module, providing hardware level key storage and platform integrity verification.

Intelligent management and system monitoring

1. ADLINK SEMA Management Solution

The NuPRO-E47 onboard ADLINK SEMA (Smart Embedded Management Agent) management subsystem provides:

Hardware health monitoring: Real time monitoring of CPU temperature, system temperature, system voltage (+5V,+12V,+3.3V, etc.), and CPU fan speed.

Remote management: conducting remote system status queries, logging, and fault alerts through the network.

API Interface: Provides an open API that allows integrators to integrate hardware health information into upper level management software.

2. Intel AMT remote management

LAN2 (I225-LM) supports Intel Active Management Technology (AMT) and provides out of band remote management capabilities, allowing for:

Remote power control: remote power on, power off, and restart.

Serial redirection: Using LAN to redirect the system serial console for BIOS level remote configuration.

Hardware asset inventory: remotely query system hardware configuration information.

Scalability and Software Ecology

1. PCIe channel allocation and expansion capability

Thanks to the abundant PCIe channel resources of the Q670E chipset, NuPRO-E47 achieves flexible channel allocation:

Rear I/O: 3 USB 3.2 Gen2 (each occupying 1 PCIe channel)