BD SENSORS DMP 333 High Pressure Transmitter

For situations with rapid pressure changes, it is recommended to use the 3-wire version (response time ≤ 3 ms) to more accurately capture pressure peaks.

When used in explosive environments, it is necessary to follow the safety installation requirements of ATEX and IECEx, ensure that the power supply is limited to the maximum safe value, and use appropriate intrinsically safe cables.

It should be avoided to install the transmitter in areas with severe vibration or impact exceeding the specification value, and vibration reduction measures should be added if necessary.

After long-term use, it is recommended to conduct regular calibration (such as once a year) to confirm that the accuracy is still within the allowable range. The long-term stability of the transmitter is 0.1% FSO/year, which can usually meet the overhaul cycle of most industrial equipment.