XP POWER C Series Micro Stabilized High Voltage DC-DC Converter
来源:
|
作者:FAN
|
发布时间 :2026-01-07
|
175 次浏览:
|
Share:
The C Series is a line of miniature, regulated high voltage power supplies. Each model is programmed from 0 to 100% of rated output via a 0 to +5 volt, DAC-compatible, high-impedance programming input voltage. Temperature drift is typically less than 50ppm/°C. These modules exhibit very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave oscillator, shielded transformer, excellent filtering techniques and an isolated steel enclosure featuring a separate grounding pin. An externally accessible potentiometer provides adjustable gain trim, allowing for individual calibration of units. A proprietary encapsulation process and a custom 94V-0 listed, high-performance formula are used to achieve excellent high voltage and thermal properties. Positive and negative outputs are standard.
Storage temperature: -20 ° C to+90 ° C
Anti interference: using quasi sine wave oscillator, shielded transformer and excellent filtering technology, with extremely low EMI/RFI
Protection: Sealed design, resistant to immersion cleaning process
Mean Time Between Failures (MTBF):>26000 hours (Bellcore TR-332 standard, C10 model)
