EATON XP-702 MICRO PANEL Industrial grade Human Machine Interface Equipment

Time/date error, battery depletion, battery replacement

SUPLY ERR lights up. Internal fault. Contact the repair center

7.5 Dual Display Activation

If the device is not connected to a monitor during startup, the system defaults to "single display mode". You can restore dual display by following these steps:

Connect the USB mouse.

Start the device, right-click on the desktop and select "Graphics Properties".

Select 'Intel (R) Dual Display Clone' and confirm.

Transportation and Storage

Storage temperature: -20 ° C to+60 ° C

Transportation requirements: Use original packaging to prevent vibration and impact

Humidity requirement: 10% -95%, no condensation

Technical parameters

9.1 Size and Weight (Taking 8.4 inches as an Example)

Height: 208 mm

Width: 275 mm

Depth (without cooling unit): 102 mm

Weight: Approximately 3.2 kg

9.2 Display Parameters

Parameter Description

Type TFT-LCD, color

Brightness 400 cd/m ² (typical)

Contrast ratio 400:1

Backlight lifespan of 50000 hours

9.3 System Parameters

Model Processor Memory

XP-702-C…/E… Celeron M 1 GHz 1024 MB

XP-702-D…/F… Pentium M 1.8 GHz 2048 MB

9.4 Power Parameters (1.8 GHz Model)

Equipment type Maximum power consumption Continuous current

BOX device 48 W 2.0 A

15 inch equipment 76.5 W 3.2 A

9.5 Protection level

Front panel (with display screen): IP65/NEMA 4X

Rear shell: IP20

BOX device: IP20

9.6 Environmental adaptability

Working temperature: 0-50 ° C (without hard drive)/0-45 ° C (consumer grade hard drive)

Vibration: Complies with IEC/EN 60068-2-6

Impact: 15 g/11 ms

Environmental Protection and Waste Management

The equipment materials include steel, aluminum, polycarbonate, glass, mercury (<5 mg), and lithium batteries. Please follow local environmental regulations when disposing of the equipment. It is recommended to return the equipment to the manufacturer or authorized recycling point for disposal.