Eaton xEnergy Safety Ci Insulated Distribution Enclosure

Eaton xEnergy Safety Ci Insulated Distribution Enclosure

Product Overview: Revolutionary Breakthrough in Fully Insulated Design

The xEnergy Safety Ci distribution box is made of high-quality polycarbonate material, with full insulation properties and a protection level of up to IP65, which can effectively resist the invasion of dust, moisture, water splashes, and various corrosive chemicals. Its design philosophy stems from a profound understanding of extreme working conditions: whether it is the dust environment of steel plants or the frequent flushing scenarios of food processing plants, the Ci series can ensure absolute safety in power distribution.

The core advantage of this system lies in "total insulation" - an active protection mechanism that does not age and does not require maintenance. Unlike traditional grounding protection, total insulation eliminates the risk of contact voltage. Even if a tool accidentally slips and causes a short circuit, it will not conduct voltage to adjacent equipment or enclosures, greatly improving the safety of operators and systems.

Core feature: Perfect combination of security and flexibility

Design of anti arc spring cover

The cover plate of the Ci distribution box adopts a four spring support structure. In the event of an internal arc fault, the cover plate can instantly slightly open to release pressure, and then automatically reset to ensure that the protective function is not lost. This design provides unparalleled operational safety in extreme short-circuit situations.

Modularity and Scalability

The system is designed based on a 25 mm grid and offers five standard sizes (Ci23, Ci43, Ci44, Ci45, Ci48) and four installation depths (125-279 mm). Asymmetric splicing can be achieved through flange extenders to flexibly adapt to space limitations. All modules use wedge-shaped insulated connectors, which can be assembled into multiple cabinets without the need for special tools.

Multi functional installation technology

Internally supports four installation methods: installation board, module guide rail, load-bearing guide rail, and busbar system. Micro perforated mounting plates can eliminate the drilling and tapping process, greatly improving the assembly efficiency of small components.

Busbar system SASY 60i

Integrated 60mm busbar system, supporting 3-5 pole configuration, with a maximum rated current of 630 A. The spacing between busbar brackets strictly follows the standard to ensure a short-circuit withstand capacity of up to 50 kA.

Application field: versatile athletes adapted to extreme environments

The xEnergy Safety Ci series is designed specifically for the following demanding scenarios:

Heavy industry: Steel mills, foundries, mines, metal processing workshops - resistant to dust, mechanical impact, and corrosive smoke.

Infrastructure: Water treatment plants, chemical plants, refineries - resistant to humidity, chemicals, and frequent flushing.

Public facilities: hospitals, airports, exhibition centers - ensuring electrical safety in densely populated areas.

Special industries: woodworking processing, food and beverage production lines - meet hygiene and waterproof requirements.

Technical specifications and certification

Protection level: IP65 (shell)/IK10 (impact resistance, IK09 for side walls and flange plates)

Material: Polycarbonate (UV resistant, compliant with ISO 4892-2500 hour test)

Electrical parameters:

Rated insulation voltage: 1000 V AC/1500 V DC

Rated short-time withstand current (Icw): 15-50 kA (1 second)

Rated peak withstand current (Ipk): 49-105 kA

Pollution level: 3, overvoltage category III

Standard compliance: IEC/EN 61439-2, IEC 60068-2-30 (wet heat cycle), IEC 60068-2-11 (salt spray test)

Hot wire test: base 960 ° C, cover 850 ° C, busbar bracket 960 ° C

Component Explanation: Complete Ecology from Shell to Accessories

Shell type:

Standard distribution box: The bottom has double-sided openings for vertical incoming lines.

E-type independent cabinet: The side panel can be knocked off and supports incoming wires in any direction.

X-type independent cabinet: Smooth side walls without dead corners, suitable for mechanical manufacturing and photovoltaic applications.

Cover options: Transparent smoke colored cover for easy visual inspection, non transparent cover available in RAL7035 color, supports cylindrical lock.

Installation accessories: including mounting plates (thickness 1.5-4 mm), DIN rails, flange plates, wall brackets, hinges, etc.

Wiring technology: KSK plug-in terminals support quick connection of 4 mm ² wires.

Intelligent Configuration: xEnergy Configurator Tool

Eaton provides a free xEnergy Configurator configuration software, allowing users to quickly design distribution systems through drag and drop. The software features include:

Automatically generate bill of materials and quotation

Integrated temperature calculation and DXF vector diagram export

Support NZM series circuit breakers RCD、 Selection and layout of components such as contactors and relays

Cross project replication and price import function

This tool greatly simplifies the process from design to delivery, ensuring that the system complies with the IEC 61439 standard.