Toshiba Motors Low & Medium Voltage Product Offering

EQP Global ®  Explosion Proof Hazardous Environment  1-350 HP IP56 Class I Division 1 Group D、Class II Division 1 Groups E-F-G，T3C 160 ℃ temperature code, spark free brass V-ring shaft oil slinger, normally closed thermostat, full frame ball bearing for 3 years

EQP Global ®  661 Petrochemical, Heat Exchanger (API 661 Standard) 5-75 HP IP56 API 661 Air to Air Heat Exchanger Special, IEEE 841 Standard, C-flange with Foot/No Foot Design, Umbrella Rain Shield (DE)+Maze Seal (DE&ODE), 300 Series Anti Friction Roller Bearings for 5 Years

EQP Global ®  Cooling Tower Drive 0.75-75 HP IP56 TEFC/TEAO Protection, Dual Frequency Design, Epoxy Coating, Umbrella Seal+Forshida ®  Sealed, resistant to moisture and corrosion, suitable for horizontal/vertical installation for 3 years

EQP Global ®  Critical Cooling: Critical Cooling Application 1-20 HP IP55 Fully Enclosed Air Cooled (TEAO), Extended Power Capability, DE&ODE Insulated Bearings, Maintenance Free Sealed Bearings, NEMA Design B， 1.15 service factor (60Hz) for 3 years

EQP Global ®  Quarry Duty quarry, high torque scenario 5-750 HP IP55 (≤ S/B449), IP54 (≥ S/B587) high torque design, 1.25 service factor (184T-365T), 1.15 service factor (404T-5810), polyurea based grease, Grade 8 hardware, vertically installed bearing lock nut (505 frame and above) for 3 years

EQP Global ®  IEC Global (IEC standard) 0.75-45 kW IP55 IE3 efficiency, dual frequency design, compliant with IEC 60034/60072/60204/60038 standards, shaft end V-ring protection, 225 IEC frame dual installation method, lead separation protection for 3 years

EQP Global ®  Closed Coupled Pump Drivers 1-75 HP IP55 Dual Frequency Design, Horizontal/Vertical Installation+C Flange Options, Shaft End V-Ring Protection, Double Drilling Base, 284 Frame and Above with Single Ring Compression Lead Wire Patch for 3 Years

EQP Global ®  Brake requires brake holding scenario 0.75-30 HP IP55 brake holding function, dual frequency design, V-ring protection at the shaft end, dual drilling base, torque models of 15 lb. ft and below support vertical installation for 3 years

Details of Medium Voltage Motor Products (100-50000 HP, 2300-13800 V)

Toshiba medium voltage motors focus on high-power and high-voltage industrial scenarios, covering 7 core models including open, protective, fully enclosed, and cooled, with efficiency reaching high efficiency level/NEMA Premium ®， F-class insulation (B-class temperature rise), drive compatible with NEMA ISO14001 Part 31 standard, machine base made of cast iron/welded steel material, supports double/three/four installation methods, protection level IP22-IP55, suitable for high-power equipment drive requirements such as petrochemical, power generation, mining, etc.

1. Common core configuration

Efficiency and Insulation: High Efficiency/NEMA Premium ®  Efficiency, F-class insulation, B-class temperature rise under 1.0 service factor, strong winding temperature resistance, suitable for medium and high voltage frequency converter drive, low energy consumption, high reliability.

Structural design: Cast iron or welded steel base, strong rigidity and high load-bearing capacity; Some models support Dual Mount, Tri Mount, and Quad Mount, suitable for complex equipment layouts.

Protection and adaptation: The protection level is IP22-IP55, and some models come with anti-corrosion breathing and drainage ports (at the lowest position of the motor and junction box). The grounding terminals and bolts are complete, and it is suitable for various environments such as indoor, outdoor, humid, and corrosive environments.

Speed and voltage:

Speed: 3600/1800/1200/900 RPM (mainstream), some models support 720 RPM to meet different load speed requirements such as fans, pumps, compressors, etc.

Voltage: 2300/4000 V, 4000 V, 6000 V, 6600 V, some models can choose 2300/4160 V, suitable for medium and high voltage industrial power grids.

Safety configuration: Standard 100 Ω platinum resistance winding RTD (2 per phase), wired to a dedicated auxiliary box; Some models come with 120V single-phase space heaters and insulated NDE bearings to enhance operational safety and maintainability.

2. Core parameters and features of segmented models

Model Protection Type Power Range Protection Level Key Features Applicable Scenarios

Open Drip Proof ODP 200-2500 HP IP22 dual voltage drive compatible, compliant with NEMA ISO14001 Part 31, cast iron base, large cast iron/welded steel NEMA I junction box with lead separation gasket, optional insulated NDE bearings, NEMA II junction box indoor universal scenario

Weather-Protected I（WP I） WPI 250-2000 HP； 700-7500 HP (CT) IP23 driver compatible, compliant with NEMA ISO14001 Part 31, cast iron/welded steel base, 5011/12, 5811/12 frames support dual installation, 5809/10/11, 6810/11/12 frames support triple installation, with bearing RTD, thermocouple or base vibration sensor reserved for outdoor mild protection scenarios

Weather Protected II (WP II) WPII 250-25000 HP IP24&IP24W driver compatible, compliant with NEMA ISO14001 Part 31, cast iron/welded steel base, multi frame support for dual/triple installation, IP24W protection, resistant to harsh outdoor environments, standard winding RTD, space heater, insulated NDE bearings for outdoor harsh environments