Atlas Copco 4240031280 PF4 Tool Cable – Reliable Interconnection for Power Focus 4 Systems

The Atlas Copco 4240031280 is a genuine PF4 tool cable designed to provide reliable power and signal transmission between Power Focus 4 controllers and Atlas Copco electric assembly tools. This cable is an essential component for maintaining accurate torque control and data communication in demanding industrial applications. Its robust construction and advanced electrical characteristics ensure consistent performance, even in challenging production environments.

Overview of the Cable

The 4240031280 cable is engineered to meet the exacting requirements of modern assembly systems. It carries both the electrical power needed to drive the tool and the communication signals required for real‑time torque and angle data. The cable's design prioritizes signal integrity, mechanical durability, and ease of handling, making it a dependable choice for high‑volume manufacturing lines.

Technical Specifications

• Part Number: 4240031280

• Cable Type: PF4 tool interconnection cable

• Length: 5.0 meters

• Connector Type: Straight, multi‑pin with locking mechanism

• Conductor Gauge: 1.5 mm² (power), 0.25 mm² (signal)

• Shielding: Overall braided copper + foil for signal pairs

• Jacket Material: Thermoplastic polyurethane (TPU)

• Temperature Range: –25 °C to +80 °C

• Voltage Rating: 300 V

• Current Rating: 8 A

• IP Rating (mated): IP67

Construction and Durability

The 4240031280 cable is built to withstand the rigors of continuous industrial use. Its TPU jacket provides excellent resistance to abrasion, oil, and chemicals, ensuring long service life in harsh environments. The cable's internal conductors are stranded for flexibility, and the overall assembly is reinforced to resist kinking and crushing. The molded connectors provide integral strain relief, preventing damage at the points where the cable meets the tool and controller.

Signal Integrity and Shielding

Maintaining accurate torque control requires clean, error‑free data transmission. The 4240031280 cable achieves this through a combination of individually shielded signal pairs and an overall braided shield. This design provides effective protection against electromagnetic interference from motors, welding equipment, and other noise sources. The cable's impedance is matched to the PF4 bus specification, ensuring minimal signal reflection and distortion.

Compatibility

This cable is compatible with all Atlas Copco electric nutrunners and screwdrivers that use the PF4 interface, as well as the Power Focus 4 controller. It supports all standard tightening strategies and data logging functions, providing seamless integration into the Atlas Copco assembly ecosystem.

Application Areas

The 4240031280 is used in a variety of assembly applications, including automotive production, aerospace manufacturing, and general industrial assembly.

Installation and Handling

Installation is simple and secure. The connectors are keyed to ensure correct orientation, and the locking mechanism provides a positive connection. The cable should be routed with adequate clearance to avoid sharp bends or pinching.

Maintenance

Regular visual inspection of the cable and connectors is recommended. Replace the cable if any damage is observed.

Compliance

The cable complies with CE, RoHS, and UL standards.

Conclusion

The Atlas Copco 4240031280 PF4 tool cable is a reliable, high‑quality interconnection solution for Power Focus 4 systems, ensuring consistent tool performance and data integrity.