GE Fanuc DS3800HIOD1H1H, Mark IV Programmable Logic Controller

GE Fanuc DS3800HIOD1H1H, Mark IV Programmable Logic Controller

Processor Speed:10 MHz Memory:2 MB RAM, 4 MB ROM Input/Output Channels:64 I/Os Communication Ports:4 RS-485 Operating Temperature Range:-40"C to +70"C Power Supply:120 VAC to 240 VAC The GE Fanuc DS3800HIOD1H1H Mark IV PLC is engineered to meet the stringent demands of industrial automation environments, offering unparalleled reliability and efficiency. This PLC model is equipped with advanced microprocessors and a comprehensive set of programming languages, enabling seamless integration with a wide range of control systems. With its robust design and extensive communication capabilities, the DS3800HIOD1H1H ensures seamless data exchange between various components within an industrial setup, enhancing operational efficiency. 

 Featuring a compact and durable enclosure, this PLC is built to withstand harsh industrial conditions, ensuring continuous operation even under challenging environments. Backed by GE Fanuc  commitment to quality and support, the DS3800HIOD1H1H comes with a suite of maintenance and troubleshooting tools, facilitating easy installation and ongoing system management. The GE Fanuc DS3800HIOD1H1H, a Mark IV PLC, offers advanced control solutions for complex industrial applications, delivering precise automation and efficiency.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).