GE FANUC PV622IS Pneumatic Pressure Station Precision Control for Industrial Applications

GE FANUC PV622IS Pneumatic Pressure Station  Precision Control for Industrial Applications

Pressure Range:0 to 2200 kPa Accuracy:+/- 0.1% of reading Response Time:Less than 0.5 seconds Operating Temperature:-10"C to +50"C Power Consumption:120 W Connection Type:ISO 1122:1999 compliant The GE FANUC PV622IS Pneumatic Pressure Station is designed for high precision and reliability in industrial environments. Its compact design allows for easy integration into various systems, enhancing efficiency and reducing downtime. Featuring a wide adjustable pressure range from 0 to 2200 kPa, it caters to a multitude of applications requiring precise control over pneumatic pressures.

 The station ensures exceptional accuracy within +/- 0.1% of the reading, making it suitable for critical processes where precision is paramount. With a response time of less than 0.5 seconds, the PV622IS guarantees swift adjustments to maintain stable pressure levels, even under fluctuating conditions. This responsiveness is crucial in dynamic industrial operations where quick adjustments can prevent costly errors. Operated within a temperature range of -10"C to +50"C, the station is designed for durability and reliability across various environmental conditions. It ensures consistent performance throughout its operational life, minimizing the need for maintenance and downtime. 

 Equipped with an energy-efficient power consumption of 120 W, the PV622IS optimizes operational costs while maintaining high performance standards. Its connection type adheres to ISO 1122:1999, ensuring compatibility with a wide range of pneumatic systems and facilitating seamless integration into existing setups. The GE FANUC PV622IS Pneumatic Pressure Station is designed for precise control of pneumatic pressure in industrial applications, ensuring optimal performance and reliability in various manufacturing processes.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module