Lauer 07182-F5 Control Panel LCA 245
The Lauer 07182-F5, part of the LCA 245 series, is a sophisticated operator control panel engineered for complex industrial environments. It combines a vibrant 10.4-inch TFT color display with a responsive resistive touchscreen, delivering clear and intuitive visualization of machine processes, alarms, and production data. This panel is designed to serve as the central human-machine interface in manufacturing lines, packaging systems, and material handling equipment, where reliability and performance are critical.
Technical Specifications
Display: 10.4-inch TFT, 800 x 600 pixels (SVGA), 16.7 million colors, LED backlight with 350 cd/m² brightness, 600:1 contrast ratio, viewing angle 80° all directions.
Touchscreen: Analog resistive, single-touch, 1 million actuations, anti-glare coating, 3H surface hardness.
Processor: 32-bit RISC ARM Cortex-A8, 800 MHz, 512 MB DDR3 RAM, 256 MB NAND flash for application storage.
Interfaces: 1 x RS232 (9-pin), 1 x RS422/485 (terminal block), 1 x Ethernet 10/100 Base-T with auto-MDI/MDIX, 2 x USB 2.0 host (Type A), 1 x USB device (mini-B), 1 x microSD card slot (up to 32 GB).
Power Supply: 24 V DC nominal (range 18–30 V DC), consumption 15 W maximum, reverse polarity and overvoltage protection.
Operating Temperature: 0 °C to +50 °C; storage: -20 °C to +70 °C.
Humidity: 10 % to 90 % non-condensing (operation), 5 % to 95 % non-condensing (storage).
Protection Rating: Front panel IP65 (when properly mounted), rear IP20.
Mounting: Panel mount with spring clamps, cutout dimensions 280 x 210 mm, overall depth 60 mm.
Weight: Approximately 2.5 kg.
Real-time clock with battery backup (lithium coin cell, life >5 years).
Audible buzzer for alarm notification.
Functional Features
The LCA 245 panel supports a comprehensive set of communication protocols including Modbus RTU, Modbus TCP, Profibus DP (via optional module), CANopen, and Ethernet/IP. This ensures seamless integration with a wide variety of PLCs, drives, and sensors. The integrated Ethernet port enables remote monitoring, data logging, and firmware updates over the network. The panel includes a built-in web server that allows users to access real-time screen views and diagnostic information using a standard browser.
Configuration and application development are performed using Lauer Configurator Studio, a powerful software environment that provides a rich library of graphical objects, animated elements, trend graphs, and alarm management tools. The software supports multi-language text switching, password-protected user levels, and recipe handling. The panel can store up to 10,000 alarm events and 50,000 data log entries in its internal flash or external SD card. Data can be exported in CSV format via USB or FTP.
Additional features include a screen saver with dimming function to extend backlight life, adjustable contrast and brightness, and a diagnostic LED for power and communication status. The unit also incorporates a watchdog timer that automatically resets the system in case of software hang-up, ensuring high availability.
Installation Guidelines
For optimal performance, install the panel in a clean, dry control cabinet with adequate ventilation. The cutout must be accurately sized to ensure proper sealing; use the supplied gasket to maintain IP65 protection. Mount the panel using the provided clips, tightening them evenly to avoid distortion. Connect the 24 V DC power supply using a shielded cable with a minimum cross-section of 1.5 mm²; the ground terminal must be connected to the main protective earth.
All communication cables should be shielded and routed separately from power lines to minimize electromagnetic interference. The RS485 network requires termination resistors at both ends if multiple devices are connected. The USB ports can be used for external memory or keyboard/mouse. For Ethernet, use a CAT5e or higher cable with a maximum length of 100 meters. Ensure the panel is not exposed to direct sunlight, excessive vibration, or corrosive gases.
Operating Conditions
The LCA 245 is designed for continuous operation in industrial settings with ambient temperatures between 0 and 50 °C. It can withstand sinusoidal vibration up to 0.5 g (10–150 Hz) and mechanical shock up to 15 g (11 ms) according to IEC 60068-2-6 and -27. The LED backlight has a typical half-life of 50,000 hours at 25 °C; operation at higher temperatures may reduce lifespan. The unit includes internal temperature monitoring; if the temperature exceeds safe limits, a warning message is displayed and the backlight brightness is automatically reduced.
For outdoor or high-ambient-light applications, an optional sunlight-readable version with higher brightness (500 cd/m²) and anti-reflective coating is available. The panel is also offered with a wide-temperature option (-20 °C to +60 °C) for extreme environments.
Applications
Typical applications include CNC machine control, injection molding machines, packaging lines, textile machinery, printing presses, and food processing equipment. The panel is also used in building automation, water treatment plants, and energy monitoring systems. Its versatile communication and robust design make it suitable for both new installations and retrofitting legacy machines.
Compliance and Certifications
The Lauer 07182-F5 Control Panel LCA 245 carries CE marking, conforming to the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. It is UL listed (UL 61010-1) and cUL certified for the Canadian market. The unit meets FCC Part 15 Class A emissions standards and is RoHS compliant. Additionally, it has passed environmental tests per IEC 60068 for temperature, humidity, and vibration.
Ordering Information
This control panel is available in several variants: with or without touchscreen, with different memory sizes, and with optional fieldbus modules (Profibus DP, DeviceNet, or EtherCAT). Custom configuration with pre-loaded application software or specific language sets can be ordered. For projects requiring higher processing power, an upgraded version with a dual-core processor and 1 GB RAM is also offered.
