Systeme Lauer PCS810‑1 Interface Module

General Description

The Systeme Lauer PCS810‑1 is a plug‑in interface module designed to expand the communication capabilities of LAUER PCS series operator panels. It provides additional serial ports and fieldbus connectivity, enabling seamless integration into various industrial networks. The module is compact, easy to install, and draws power directly from the host panel.

Interfaces and Features

• RS‑232 Port: 9‑pin D‑sub, fully isolated

• RS‑485 Port: Screw terminal, half‑duplex, with termination option

• Profibus DP (optional): Slave interface with 9‑pin D‑sub

• Configuration: Via host panel's software, no separate programming required

Technical Specifications

• Power: 5 V DC from host, < 150 mA

• Isolation: 1.5 kV between ports and host

• Baud Rates: Up to 115200 (serial) / 12 Mbit (Profibus)

• Dimensions: 60 x 50 x 20 mm

• Weight: 50 g

• Temperature: 0‑55 °C

Installation

Ensure host panel is powered off. Remove the cover from the expansion slot, insert the module, and secure with screws. Connect the required cables (serial or fieldbus). Set any address switches (for Profibus). Power on – the host panel will detect the module automatically.

Configuration

In the host panel's configuration software, enable the additional ports and set parameters (baud rate, protocol). For Profibus, import the GSD file into the master PLC.

Maintenance

Periodically check cable connections. No internal user‑serviceable parts.

Ordering

PCS810‑1 standard. Profibus option available as PCS810‑1‑PB.