Lauer EPCG Box Embedded 1000TC Motherboard

Product Overview

The Lauer EPCG Box Embedded 1000TC is a high‑performance industrial motherboard designed for embedded computing applications. It is part of the EPCG (Embedded PC Generation) series and features a compact form factor with extensive I/O capabilities. The board includes a bridge board (LPO33/64) that provides additional connectivity and expansion options. It supports a range of memory modules and is built for reliable 24/7 operation in industrial environments.

Processor and Chipset

The motherboard is powered by an Intel Atom or Celeron processor (specific variant depends on configuration) with an integrated chipset that supports dual‑channel DDR3/DDR4 memory. The board provides a soldered‑on CPU with passive cooling, ensuring fanless operation and low power consumption.

Memory Support

Two SO‑DIMM slots support up to 16 GB of RAM (DDR3L or DDR4, depending on revision). The board also includes an onboard SSD (eMMC or SATA DOM) for system storage, plus a SATA connector for additional drives.

Bridge Board LPO33/64

The LPO33/64 bridge board is an optional add‑on that provides additional interfaces: extra USB ports, serial ports (RS‑232/485), and a digital I/O connector. It also includes a fieldbus interface (Profibus or CANopen) and a power management unit. The bridge board connects to the main motherboard via a high‑density pin header.

I/O and Connectivity

• Ethernet: 2x Gigabit (RJ45)

• USB: 4x USB 2.0, 2x USB 3.0

• Serial: 2x RS‑232 (onboard), plus optional on bridge board

• Video: VGA and DisplayPort (or HDMI)

• Audio: Line‑out, mic‑in

• Expansion: 1x mini‑PCIe, 1x M.2

• Digital I/O (bridge): 8 inputs, 8 outputs (24 V)

Electrical and Environmental Specifications

• Power Supply: 24 V DC (18‑36 V), typical 20 W

• Operating Temperature: –10 °C to +55 °C

• Storage Temperature: –20 °C to +70 °C

• Dimensions: 170 mm x 170 mm (Mini‑ITX form factor)

• Weight: 0.5 kg

Installation and Configuration

Mount the motherboard in a suitable chassis using standard standoffs. Connect the 24 V power supply (two‑pin or Phoenix connector). Install memory modules and storage. Attach the bridge board if required. Boot from onboard storage or external drive – the system supports Windows Embedded and Linux. Configure BIOS settings for watchdog timer and power‑on behaviour.

Maintenance and Troubleshooting

Regularly clean dust from heatsink. Check capacitors for bulging. Common issues: no boot – check memory seating; network failure – check cable and driver; bridge board not recognized – verify connection.

Ordering

Specify the exact CPU variant and whether the bridge board LPO33/64 is included. The motherboard is available as a standalone unit or with pre‑installed memory and storage.