EATON XV-303/XV-313 series industrial multi touch HMI display

10.1-inch widescreen model:

XV-303-10-B00-A00-2B/2C (basic interface)

XV-303-10-C00-A00-2B/2C (Dual Ethernet)

XV-313-10-B00-A00-2C (rear installation, 1.5mm panel)

XV-313-10-B00-A11-2C (rear installation, 2.0mm panel)

15.6-inch widescreen model:

XV-303-15-C00-A00-2B/2C (front panel installation, dual Ethernet)

In depth analysis of technical specifications

4.1 Display Performance

Parameter 7.0 inches 10.1 inches 15.6 inches

Resolution 1024 × 600 1024 × 600 1366 × 768

Visible area 153.6 × 90.0mm 222.7 × 125.3mm 344.2 × 193.5mm

Contrast ratio 850:1 500:1 500:1

Brightness 400 cd/m ² 400 cd/m ² 400 cd/m ²

Backlight type LED, software dimmable LED, software dimmable LED, software dimmable LED

Backlight lifespan 50000 hours @ 25 ℃ 50000 hours @ 25 ℃ 50000 hours @ 25 ℃

Approximately 16.7 million colors (24th digit) Approximately 16.7 million colors (24th digit) Approximately 16.7 million colors (24th digit)

4.2 Power Requirements

The XV300 series uses 24 VDC power supply and must meet SELV/PELV safety requirements:

Rated voltage:+24 VDC

Allowable range: 19.2-30.0 VDC (rated voltage -20%/+25%)

Absolute limit: 18.0-31.2 VDC (including ripple)

Battery powered: 18.0-31.2 VDC (-25%/+30%), capable of withstanding 35V peak values of<100ms

Voltage sag tolerance: can withstand ≤ 10ms drop at rated voltage 24VDC, and ≤ 5ms drop at undervoltage 19.2VDC

Power consumption and current:

7.0-inch equipment: maximum 18W, current ≤ 0.6A@24V

10.1-inch equipment: maximum 14.4W, current ≤ 0.75A@24V

15.6-inch equipment: maximum 21.6W, current ≤ 0.9A@24V

The above power consumption includes USB module power consumption (2.5W)

4.3 Environmental adaptability

Work environment:

Temperature: 0 ° C to+50 ° C

Relative humidity: 10-95%, no condensation

Air pressure: 795-1080 hPa (altitude ≤ 2000m)

The influence of installation posture on temperature:

XV-303-70/10 and XV-313 series: When the tilt angle is ≤± 45 °, the maximum operating temperature is 50 ° C

XV-303-15: When the tilt angle is ≤± 10 °, the maximum temperature is 50 ° C; when it is ≤± 45 °, the maximum temperature is 45 ° C

Storage and transportation:

Temperature: -20 ° C to+60 ° C

Relative humidity: 10-95%, no condensation

4.4 Protection level and certification

Protection level: front panel IP65/NEMA 4X/12, rear IP20

UL Certification: Compliant with UL 61010-2-201, Document Number E205091

CE certification: compliant with the EU EMC Directive (2014/30/EU) and ATEX Explosion Protection Directive (2014/34/EU)

Classification society certification: DNV GL type certification, certificate number TAA00000NC (7.0 "and 10.1" models, requiring installation of power filter)

Explosion proof certification: II 3D Ex tc IIIC T70 ° C IP6x, suitable for dusty environments in Zone 22

4.5 Mechanical dimensions and weight

Installation of 7.0-inch front panel:

Dimensions: 196 × 135 × 51mm (width × height × depth)

Weight: 0.74kg

Installation of 10.1-inch front panel:

Dimensions: 269 × 174 × 58mm

Weight: 1.13kg

15.6-inch front panel installation:

Dimensions: 401.7 × 254.9 × 67.6mm

Weight: 3.25kg

7.0-inch rear installation:

Dimensions: 209 × 151 × 51mm

Weight: 0.8kg

10.1 inch rear installation:

Dimensions: 282 × 190 × 58mm

Weight: 1.21kg

Installation and wiring specifications

5.1 Preparation before installation

Installation work must be carried out by qualified electricians and strictly comply with the following safety regulations:

Disconnect the device power and prevent accidental reconnection

Verify equipment and power isolation

Grounding and short circuit

Cover or isolate adjacent live parts

Comply with the requirements of EN 50110-1/-2 (VDE 0105 part 100)

5.2 Hole Requirements

Front panel installation (XV-303):

Installation panel thickness: 2mm ≤ d ≤ 5mm

Hole flatness: ≤ 0.5mm, surface roughness Rz ≤ 120

The opening size needs to be precise to ensure that the sealing ring is uniformly compressed

Rear installation (XV-313):

A00 version: Installation panel thickness d=1.5mm ± 0.1mm

A11 version: d=2.0mm ± 0.1mm

M4 × 12 bolts need to be welded on the panel, with the position referring to the installation dimension diagram

5.3 Ventilation and heat dissipation

XV300 adopts natural convection cooling, and the following minimum spacing should be ensured during installation:

Equipment surroundings: ≥ 30mm

Distance from heating elements (such as heavy-duty transformers): ≥ 150mm

Do not block the ventilation openings above and below the equipment

5.4 Functional grounding

Proper functional grounding is crucial for electromagnetic compatibility and anti-interference performance:

Wire cross-sectional area: ≥ 1.5mm ² (AWG16)

Wire length: ≤ 350mm

Grounding bolt: M4 × 8, tightening torque 1.3Nm

Recommend using M4 perforated terminals with an inner diameter of 4.3mm and an outer diameter of ≤ 8mm

5.5 Power Wiring

The power connector adopts MSTB 2.5/3-ST-5.08 pluggable terminals:

Pin definitions:+(24V), n.c. (empty), - (0V)

Wire specification: 0.75-2.5mm ² (AWG18-12)

Stripping length: 7mm

Tightening torque: 0.6-0.8Nm

The power supply must come from a SELV power supply that complies with IEC 60950 or a low-voltage power supply that complies with UL 61010-2-201.

Interface Explanation and Connection Guide

6.1 SD card interface