ABB H&B Contronic PE 01 Motor Module 6607-2-0 H&B Contronic

ABB H&B Contronic PE 01 Motor Module 6607-2-0 H&B Contronic

Basic information

Model Number: The complete model number is 6607-2-0, which is the PE 01 Motor Module in the H&B Contronic series.

Dimensions and weight: It measures approximately 9.0 inches by 6.0 inches by 6.0 inches, or 22.9 centimetres by 15.2 centimetres by 15.2 centimetres, and weighs approximately 5 pounds 3.0 ounces, or 2.4 kilograms.

Functional features

Precise control: can accurately control the motor start, stop, speed and steering, to ensure that the motor runs accurately according to the requirements, to meet the needs of industrial production and other scenarios on the precise control of the motor.

Multiple control modes: It supports multiple control modes, such as open loop and closed loop, and can choose the appropriate control mode according to different application scenarios and control requirements to ensure the precision and stability of motor operation.

Signal monitoring and processing: It can monitor the current and other signals of the motor in real time to control the torque output of the motor, and detect the overload and other abnormal conditions in time, and also process the signals from the speed sensor and other feedback devices to achieve the precise control of the motor speed and position.

Protection function: with overload protection, short circuit protection and other functions, when the motor fails, it can quickly reduce the power supply of the motor or cut off the power supply to prevent the motor and the whole system from being damaged due to overcurrent, which effectively improves the reliability and safety of the system.

Application Fields

Industrial automation: Widely used in chemical, pharmaceutical, food and beverage industries such as automated production lines, precise control of the motor equipment on the production line, to ensure the efficient and stable operation of the production process.

Logistics and warehousing: used to control the motors of stacker cranes, automatic guided vehicles (AGV) and other equipment in automated warehouses to achieve automated storage and handling of goods and improve logistics efficiency.

Intelligent building: It is suitable for lifts, ventilation systems and other equipment, precisely controlling the lift speed and stopping position of lifts, as well as adjusting the rotational speed of ventilation system motors according to indoor environmental parameters, so as to realise intelligent management of building facilities.

Supported ABB I/O Systems and Families

• S800 I/O, a distributed modular I/O system for communication via ModuleBus  and PROFIBUS DP. 

• S900 I/O, a remote I/O system (for hazardous areas) that can be connected to  PLCs via PROFIBUS DP. 

• S200 I/O and S200L I/O, two compatible, modular I/O systems. S200 I/O  modules can be connected via CI856 or PROFIBUS DP to PLCs. • S100 I/O, a rack-based I/O system that can be connected to PLC using the  CI856 interface module. 

• Satt I/O, makes it possible to use Satt Rack I/O (an older Satt I/O system)  connected to PLC using the CI865 communication interface.

Main features

· 24 digital inputs with LED displays 

· 16 digital transistor outputs with LED displays 

· 8 digital inputs/outputs with LED displays 

· 8 individually configurable analog inputs 0...10 V, 0...5 V, ±10 V, ±5 V, 0...20 mA, 4...20 mA, differential inputs, Pt100 (2-wire or 3-wire), the analog inputs are also individually configurable as digital inputs 

· 4 individually configurable analog outputs ±10 V, 0...20 mA, 4...20 mA 

· 2 counters for counting frequencies up to 50 kHz, configurable in 7 different operating modes · 1 CS31 system bus interface for system expansion 

· 1 interface for connecting communication modules (e.g. 07 KP 90) 

· 2 serial interfaces COM1, COM2 

– as MODBUS interfaces and 

– for programming and test functions 

· Real-time clock 

· LEDs for displaying operating conditions and error messages 

· Detachable screw-type terminal blocks 

· Fastening by screws or by snapping the device onto a DIN rail 

· The lithium battery 07 LE 90 can be put into the battery compartment in order to 

– store and backup the user program in the RAM 

– store and backup data which is additionally contained in the RAM, e.g. the status of flags 

– backup the time and date (real-time clock) 

· RUN/STOP switch for starting and aborting the program execution 

· Extensive diagnosis functions 

– self-diagnosis of the basic unit 

– diagnosis of the CS31 system bus and the connected modules