GE DS200ADMAH1A Analog-to-Digital Module

GE DS200ADMAH1A Analog-to-Digital Module

Part Number DS200ADMAH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockGeneral Electric DS200ADMAH1A Analog to Digital Daughterboard (ADMA) Mark V Series. This daughterboard is compatible with a variety of GE drives and exciters. This board's aluminum faceplate has cutouts that make it easy to mount on top of the drive's (DPSC) board. 

This card buffers, filters, and converts analog and digital I/O fed to the drive once inserted. All system I/O is reliably read, transformed, and communicated when the DS200ADMAH1A board is used. This daughterboard has an additional twelve analog inputs in addition to the ones provided by the drive. This card also includes four analog outputs. The board's eight digital input and output ports can be used to relay digital I/O communications. This device has an integrated programmable logic device. 

 The logic device works to provide interface capabilities between the ADMA I/O and the DSPC processor buses by leveraging static RAM. Two LED indicators are displayed on the board, one green IMOK LED and one red FAIL LED, to notify users to any mistakes or malfunctions. The device's installation instructions should be followed. This will verify that both the DS200ADMAH1A and the inserted drive function properly. Refer to the device manual and datasheet for detailed guidance to wiring and mounting the daughterboard to the DSPC. The maker of the Mark V series, General Electric, was the first to give technical support for this card.

OTHER INFORMATION

• Celeron™ socket 370-based single-board computer (SBC) with operating  system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX,  and Solaris 

• Special features for embedded applications 

— Up to 512 Mbyte IDE CompactFlash (optional) 

— Three programmable 16-bit timers 

— 32 Kbyte of battery-backed SRAM 

— Remote Ethernet booting supported 

— Software-selectable watchdog timer with reset 

— Supports VMEbus P2 connection to HD/floppy drive 

— PMC expansion site with VMEbus P2 I/O 

— PC•MIP expansion site supported 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 

— VMEbus interrupt handler, interrupter, and system controller 

— Includes byte-swapping hardware for little-endian and big-endian data  interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink design (no moving parts) 

• Standard features include 

— Celeron socket 370 processor 

— Up to 256 Mbyte SDRAM using one 144-pin SODIMM 

— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM 

— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX  interfaces 

— On-board Ultra DMA/33 hard drive and floppy drive controllers with  VMEbus P2 I/O 

— Two high-performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse port on front panel 

— Real-time clock and miniature speaker included